This entire set of electronics was removed from a Torro Tiger 1. All tested and fully working, so be sure you know what you are doing before installing it. Eg do not connect to a battery whilst bare wire ends are exposed.
It includes the recoil/elevation unit, mfu, smoke unit, switches, high intensity flash unit, all plugs, cable clamps, and screws.
The transmitter is included.
The machine gun is not included.
All bare ends have labels attached so that you know what they are for, they simply need soldering to the wiring in your tank.
I will leave most plugged into the mfu. There are diagrams on the web showing where everything goes.
£60 + £5 p&p.
Full set of Torro 2.4 electronics
Forum rules
RULES LAST UPDATED 13/03/2016
Please make sure you are up to date with this sections rules and guidelines before creating a new post. You can find them here: viewtopic.php?t=25306
RULES LAST UPDATED 13/03/2016
Please make sure you are up to date with this sections rules and guidelines before creating a new post. You can find them here: viewtopic.php?t=25306
-
wibblywobbly
- Major
- Posts: 6396
- Joined: Fri Oct 17, 2008 9:30 am
- Location: South Wales Valley
- Contact:
