Page 1 of 1
Cheap TCB Wanted
Posted: Thu Aug 01, 2019 8:12 am
by wibblywobbly
If anyone has a cheap TCB that they are happy to part with then PM me. I am just looking to find one to experiment with.
I have Arduino Mega boards, and only need basic tank functions, so even a breakout board (rare though they are) would also be interesting.
Re: Cheap TCB Wanted
Posted: Tue Aug 06, 2019 7:53 am
by jhamm
Hi,
it´s very easy to build a TCB by your self with a Arduino Mega:
My TCB´s with a Mega 2560 Mini Pro:
Re: Cheap TCB Wanted
Posted: Tue Aug 06, 2019 8:19 am
by Rad_Schuhart
jhamm wrote:Hi,
it´s very easy to build a TCB by your self with a Arduino Mega:
Mega_Drive_Full-1920.jpg
My TCB´s with a Mega 2560 Mini Pro:
Five.jpg
Hi, it might be easy for you. For us, mere mortals, seems complicated, lol.
Have you planned to sell your TCBs? Is it possible to make them smaller?
Re: Cheap TCB Wanted
Posted: Tue Aug 06, 2019 9:58 am
by jhamm
Rad_Schuhart wrote:
Have you planned to sell your TCBs?
No.
Rad_Schuhart wrote:
Is it possible to make them smaller?
This is certainly possible with a baseboard and piggyback the mega mini pro.
But i am not an electronics engineer and not familiar with circuit routing program.
Re: Cheap TCB Wanted
Posted: Tue Aug 06, 2019 10:35 am
by wibblywobbly
Could you explain what is in the photograph? The red boards all have different components on them?
The components shown on the red boards are not shown in the circuit diagram? Eg Resistors etc.
Re: Cheap TCB Wanted
Posted: Tue Aug 06, 2019 10:45 am
by jhamm
For you is the picture with Arduino Mega....
Do this as first try - you need only some wire
If this work, we talk about the Mega 2560 Mini Pro.
Re: Cheap TCB Wanted
Posted: Tue Aug 06, 2019 11:58 am
by wibblywobbly
Many thanks, that makes sense. I just need a PWM>PPM converter, cheap to buy, and two speed controllers. I have a Benedini Mini clone on the way for sound.
The only complication is that the Torro Tiger I am going to use to test it has a non-servo recoil/elevation. I will need to figure out how to get that working.
Re: Cheap TCB Wanted
Posted: Tue Aug 06, 2019 12:12 pm
by Rad_Schuhart
wibblywobbly wrote:Many thanks, that makes sense. I just need a PWM>PPM converter,
Fit a multiprotocol module in your radio and you will have both PWM and PPM, and you can enjoy the use of those nail sized 16ch receivers.
Re: Cheap TCB Wanted
Posted: Tue Aug 06, 2019 12:28 pm
by jhamm
wibblywobbly wrote:
The only complication is that the Torro Tiger I am going to use to test it has a non-servo recoil/elevation. I will need to figure out how to get that working.
It is easy...
Look at here:
http://openpanzer.org/forum/index.php?topic=16.0
There is all nessecary information