Commisioning TK 22

[Jofaur86]

Good evning
I have a question,on the setting in service TK 22 ?? I'm leaving the following link,
http://www.clark-model.com/eng/prod_rx2 ... everything works,idem described,except that the engines do not work reverse r Think a concern of setting on a trsmitter ?Thnk you for answer

[43rdRecceReg]

That link doesn't work, Jofaur. Try this:
http://www.clark-model.com/eng/index_e.html
It's a tutorial on setting up the Tk 22.
Fine tuning the transmitter might be the solution.

[Jofaur86]

Désolé
http://www.clark-model.com/eng/prod_rx20_tu/index.html

[Jofaur86]

Link translated into French,from the RCU forum??
This one should work ? On the clark tutorial,I can not seem to get the following commands,
But works according to RCU link,except for the concerns mentioned in the first message

[Jofaur86]

Hello,
No one has any solution my problem? Well then I'II manage!!!

[silversurfer1947]

Just out interest, what stick mode are you using? I use a transmitter for both aircraft and tanks, using different modes. If I forget to change over, things behave very strangely.

[Jofaur86]

Hello
I use mode 2, radio Futaba T7cp ( avion,Hélico) and actually struggling to find the functions as documentations Clark ?position of the sticks in Clark ,impossible

[silversurfer1947]

Try switching to Mode 1. That's what I use on my FlySky i6. The half posititions can be a bit tricky, but with a bit of practice they do get easier.