Page 1 of 4
Sd Kfz 223 conversion
Posted: Fri Apr 27, 2018 8:36 pm
by capt midnight
Okay, I finally decided to start doctoring on my HL truck. I was wanting something to run with our German tanks, but wasn't having any luck coming up with any ideas. I came across a picture of the 223 and thought it would make the perfect build. I think it's pretty close to 1/16th, but not exact. I scaled the prints to match the tire diameter and went full speed ahead.
Here's the truck with the scaled up plans.
- prints
I had to lengthen the wheel base 15mm to make it match the prints.
- wheel base lengthened
I used ribs to make a center box section to build the rest of the body off of.
- framing started
- center box
And starting on the body itself.
- side panels
- rear lower
Bill
Re: Sd Kfz 223 conversion
Posted: Fri Apr 27, 2018 8:40 pm
by capt midnight
Here's how the body came together...
Test fitting the body onto the truck frame.
- on frame 1
- on frame 2
Had to do a bit of trimming on the frame, but nothing too severe.
More to come!
Bill
Re: Sd Kfz 223 conversion
Posted: Fri Apr 27, 2018 8:49 pm
by capt midnight
I ran the top of the fenders all the way through the body to give them a bit of strength...
- fenders 1
- fenders 2
Here's some shots of the body, so far, mounted on the chassis.
- outside 1
- outside 2
And a short video of it running to check the steering.
https://www.youtube.com/watch?v=7uJucUq ... e=youtu.be
Bill
Re: Sd Kfz 223 conversion
Posted: Fri Apr 27, 2018 8:56 pm
by capt midnight
Adding the details now...
- view blocks and tool box
- top turret
The spare tire is just foam covered with a piece of cloth
- spare tire
Here's the front mount for the antenna.
- front antenna mount
The plan was to have the antenna be able to be placed up or down.
- antenna down
- antenna up
More coming!
Bill
Re: Sd Kfz 223 conversion
Posted: Fri Apr 27, 2018 9:04 pm
by capt midnight
Here's some pictures of the details...
- rear hatch
- passenger side
- drivers side
- overall view
I made the mufflers out of flattened brass tube, copper sheet, copper tubing and solid wire.
- mufflers
The manifolds are made out of some scrap resin castings.
- mufflers mounted
Bill
Re: Sd Kfz 223 conversion
Posted: Fri Apr 27, 2018 9:10 pm
by capt midnight
Now it's time for some painting!
The MG for the top turret
- turret MG
I made up a light tow cable to wrap around the front bumper. It's picture hanging wire and some small aluminum tube.
- tow cable
Here it is after a coat of sand paint and some shadowing with the airbrush.
- painted 1
- painted 2
Bill
Re: Sd Kfz 223 conversion
Posted: Fri Apr 27, 2018 9:15 pm
by Marco Peter
Wow, I am amazed buy hoe 'easy' you make this look, it's stunning!
Re: Sd Kfz 223 conversion
Posted: Fri Apr 27, 2018 9:16 pm
by capt midnight
Re: Sd Kfz 223 conversion
Posted: Fri Apr 27, 2018 9:18 pm
by capt midnight
Thanks, Marco!
It does look pretty cool running around on the ground. I've got to get a video of the turret in action. I have it tied ionto a servo with the 4 wheel steering option on my radio, so it moves as you steer the truck.
Bill
Re: Sd Kfz 223 conversion
Posted: Fri Apr 27, 2018 10:28 pm
by lost_wolf
Another amazing creation , love the one off builds Capt !!