RC Tank Warfare community hobby forum

I see some people have put Braided pipes on the air cleaner pipes..anyone know where you can get these from ..thanks

Depends on how detailed you want to be. I know there are photo etched sets available. My easy quick fix was some old air compressor hose braided from my airbrush. I cut it to size and glued the ends of them was very easy.

Not perfect but good enough for me

That's a great idea thanks

Luckylefty42 wrote:That's a great idea thanks

Again it's not for the purist but to upgrade over those basic ugly plain hoses it's a nice upgrade. Didn't cost much- a slplit hose. the ends were a bit narrow for the connectors to the engine deck cover and the air cleaner ends so I sanded them down a bit and carefully opened up the inside diameter of the rubber inner hose. I used glue to keep the ends of the fabric from unbraiding ( learned the hard way).

If you go to ---
www.forgebeartanks.com
Click on the "ABER" plate,
What you are after is "ABER" 16031 Feifal Air Cleaner £16.99,
It is Photo- Etch, About now most people who haven't worked with PE are saying no way, But this is so easy,
Separate the sheets into 4 pieces, One for each plastic pipe then trim the edges with a fine file or emery board and then you quite literally wrap the sheet of PE around the plastic hose good and tight, as you wrap it you will see it taking a multi angled shape, Once it is tightly wrapped you then either SOLDER or GLUE along the seam and repeat for the other 3 pipes,
Job done.
A TIP, Push a biro or similar through the plastic pipe to put some rigidity in it as you wrap it. I don't use the end caps they are more trouble than they are worth.
You end up with a set of 4 Air cleaner pipes looking exactly like the real thing.
When I first began building Tiger 1s I would use braided hose because I was wary of using PE having heard stories of how difficult it was,
They Lied,
Shaun.

or try and look on here for it
http://www.ebay.co.uk/sch/i.html?_from= ... e&_sacat=0

dave

I used old airbrush pipe too, prior to that I just used to neatly wrap thread around the plastic pipes and dab it with superglue.

Thanks (Forgebear) Dave I ordered that braided material from Ebay . I'll let you all know how good it it's when I get it. And I took the top off my tiger and put the IR version I got from you . It's now painted and working great thanks

your very welcome thanks dave