Tank Girl is new! (if only...)
Tank Girl is new! (if only...)
Hiya, I am new here...
I thought I wasn't here at all for a couple of weeks as I didn't receive an email or anything but my usename and password works - and it seems I can post, so....
I have just discovered - well, in the last couple fo years - Heng Long RC tanks and now have four of them. A tiger, two Panzer IIIs and a Panzer IV
Why, two Panzer IIIs you may ask? Well, that is a long story that involves UPS (Useless Parcel Smashers) smashing the first one one that they delivered to me by putting a pole through the side of the carton. I ended up purchasing the damaged one for £20 as as a rebuilder on top of the one I accepted (UPS damaged that too - the transformer was broken and the transformer from the first one was accepted in its stead!)
Anyway, enough of them.
My first big Q: I am now rebuilding the Panzer III that had its suspension smashed and need to know how to get into the suspension pivot fixings. I already know how to take the hull apart as I had to do some re-soldering in there but this does not give access to the arm pivots.
Any ideas?
Best wishes
TJxxx :-* :-* :-*
I thought I wasn't here at all for a couple of weeks as I didn't receive an email or anything but my usename and password works - and it seems I can post, so....
I have just discovered - well, in the last couple fo years - Heng Long RC tanks and now have four of them. A tiger, two Panzer IIIs and a Panzer IV
Why, two Panzer IIIs you may ask? Well, that is a long story that involves UPS (Useless Parcel Smashers) smashing the first one one that they delivered to me by putting a pole through the side of the carton. I ended up purchasing the damaged one for £20 as as a rebuilder on top of the one I accepted (UPS damaged that too - the transformer was broken and the transformer from the first one was accepted in its stead!)
Anyway, enough of them.
My first big Q: I am now rebuilding the Panzer III that had its suspension smashed and need to know how to get into the suspension pivot fixings. I already know how to take the hull apart as I had to do some re-soldering in there but this does not give access to the arm pivots.
Any ideas?
Best wishes
TJxxx :-* :-* :-*
Re: Tank Girl is new! (if only...)
Hi,
take the tracks off by pushing out 1 of the pins, gently sprise the wheels apart working your way around the rim until the outer wheel comes off, then you'll see a screw holding the inner wheel on, remove that, take the inner wheel off and you'll ree the screw holding the suspension arm
hope that helps regards Jack.
take the tracks off by pushing out 1 of the pins, gently sprise the wheels apart working your way around the rim until the outer wheel comes off, then you'll see a screw holding the inner wheel on, remove that, take the inner wheel off and you'll ree the screw holding the suspension arm
hope that helps regards Jack.
- FireflyKeith
- Warrant Officer 2nd Class
- Posts: 1158
- Joined: Mon Sep 29, 2008 11:12 pm
- Location: Northants, UK
Re: Tank Girl is new! (if only...)
Hi Tank Girl and welcome to the forum, sounds like you specialize in broken tanks ::) but hey thats half the fun taking them apart and re-building them
sorry i cant help with the Panzer III problem, as i dont have one of these but im sure plenty of people on here do and will be willing to help 
Keith


Keith

-
- 2nd Lieutenant
- Posts: 2294
- Joined: Fri Sep 26, 2008 11:24 pm
- Location: Now Living in Cyprus .... Modellers desart ...
Re: Tank Girl is new! (if only...)
why hello there tank girl 
its abot time we had a lady on board to keep us track heads in check !
just wounder though ..... lol .. are you a spy ? or a black mailer // holding us al to ransom for not telling
our better halfs about how much we realy doo spend
we have all been there sneeking in the odd tank ... part ... book ..... and hopeing like mad its going to rain
at the weekend to avoid the garden center or worse .. grass cutting ( less places to hide the armour in combat ! )
any way
WELCOME TANK GIRL ..
IAIN

its abot time we had a lady on board to keep us track heads in check !
just wounder though ..... lol .. are you a spy ? or a black mailer // holding us al to ransom for not telling
our better halfs about how much we realy doo spend

we have all been there sneeking in the odd tank ... part ... book ..... and hopeing like mad its going to rain
at the weekend to avoid the garden center or worse .. grass cutting ( less places to hide the armour in combat ! )
any way
WELCOME TANK GIRL ..
IAIN
A tidy desk
is a sure sign of a sick mind ?
is a sure sign of a sick mind ?
Re: Tank Girl is new! (if only...)
welcome aboard tankgirl hope you enjoy your stay here 

Re: Tank Girl is new! (if only...)
Welcome to the forum. Hope you enjoy your new hobby. All the best for now
Alan
Alan
Re: Tank Girl is new! (if only...)
I've had several damaged parcels from UPS too (one just yesterday) so I can sympathise tankgirl. Welcome to the forum by the way. You are certainly in the right place for re-building model tanks.
Cheers
Chris
Cheers
Chris

-
- Staff Sergeant
- Posts: 938
- Joined: Sat Oct 04, 2008 7:45 am
- Location: Uxbridge, London
Re: Tank Girl is new! (if only...)
Welcome to the addiction! I look forward to seeing your tanks.
It's nice to have some of the fairer gender to balance things out here
Rik
It's nice to have some of the fairer gender to balance things out here

Rik
Re: Tank Girl is new! (if only...)
Hi there tank girl welcome sorry to here about the UPS damaging your tanks ,If you want to upgrade the suspension to metal which if you have to repair the it will cost about £20 here is the upgarde that you need .http://cgi.ebay.co.uk/Heng-Long-1-16-Pa ... 7C294%3A50
There are lots of mods that can be done to the Panzer 3 but has you are starting with the suspension You could also fit metal wheels but it is posible to fit the plastic ones it all depends on your budget ,then there are metal tracks and sprockets this should give you a good lower hull .If you need help just fire a post on the main area and someone will offer the advice you need .
regards pete
There are lots of mods that can be done to the Panzer 3 but has you are starting with the suspension You could also fit metal wheels but it is posible to fit the plastic ones it all depends on your budget ,then there are metal tracks and sprockets this should give you a good lower hull .If you need help just fire a post on the main area and someone will offer the advice you need .
regards pete
- tankmad
- Warrant Officer 2nd Class
- Posts: 1335
- Joined: Tue Jan 27, 2009 10:02 pm
- Location: glasgow
- Contact:
Re: Tank Girl is new! (if only...)
Hi tankgirl welcome to the site its refreshing to see a girl into tanks my wife looks at me as if im playing with my toys I suppose shes right 
Stevie

Stevie
http://www.tankworld.co.uk
This is not an obsession I can give it up anytime
This is not an obsession I can give it up anytime