2.4 Radio gear

[fastfaz]

Greetings everyone,
I am an absolute novice with Tanks and the electrics/boards etc I don't have a clue what an IBU or a Clark board is so I need help (the wife says this all the time!). I am quite good with model tugs and the scratch wiring of the ESC's, receiver, fuses/switches etc but lost with the same in a tank. What I would like to know is can I use my 2.4 gear i.e. Spektrum DX6 and Receiver 6 channels in a Tank? I have a number of Tx's and matching RX's from my Tugs so it seems silly not to use them if possible, the DX6 can be programmed for 240 different models its got a huge memory. I am in the process of finding a tank at this time so would really appreciate any help and advice. Thanks guys.
Cheers,
Peter.

[tomhugill]

In a word yes

[Model Builder 4]

Hi Peter, your Dx6 will work on the tanks but not with the standard electronics ie heng long / taigen boards but it will work with tamiya electronics. so if you want it to work with an HL or taigen tank you will need an after market board, I use a spektrum Dx6i with my tamiya tanks and with my ibu2, hope this helps

Cheers, Lee.

[Estnische]

This might help:

phpBB [video]