Hooben T55 Question

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
User avatar
Cruiser133
Private
Posts: 94
Joined: Sat Feb 23, 2013 11:17 pm
Location: USA

Hooben T55 Question

Post by Cruiser133 »

Guys,

Does anybody know the dimensions for the road wheel and idler bearings in the Hooben T55A kit? I am trying to find some bearings to replace the bushings in my Enigma project...
Top
User avatar
tomhugill
Captain
Posts: 4883
Joined: Thu Apr 15, 2010 11:21 am

Re: Hooben T55 Question

Post by tomhugill »

When I did mine I use bearings salvaged from the output shafts off Tamiya gearboxes. If you got ones that dimension without the flange I think you'd be there. If I can find my hooben kit in the sarlac that's my garage I'll measure them for you
Top
User avatar
B_Man
Corporal
Posts: 493
Joined: Fri Apr 03, 2009 1:23 pm
Location: Yass, NSW, Australia

Re: Hooben T55 Question

Post by B_Man »

The outer diameter is 8mm, the inner is 6mm and they are 2mm thick. The original road wheels need a bit of drilling out before they will fit.
Top
User avatar
Cruiser133
Private
Posts: 94
Joined: Sat Feb 23, 2013 11:17 pm
Location: USA

Re: Hooben T55 Question

Post by Cruiser133 »

Thanks Guys!!!
Top
Post Reply

Return to “General Questions”