Torro KV2 Turret

[mike1268]

I've taken my KV2 turret to bits to paint it and make a few upgades/changes. I have a white wires that has broken loose that goes to the recoil motor. I assume it used to go to the switch in the top. The black wire that is also on the switch was hanging loose so I now have no idea where the white cable should be soldered to bypass the switch. Any ideas?

[RobW]

Are they wires you can see through the turret ring, or does it need taking apart? Only asking as I wasn't planning on dismantling mine until I was ready to do the rebuild.

[mike1268]

It's in bits now. I had stripped it down to fit a camera and vampire. Will take a pic

[RobW]

I'll have a look this evening if I get chance.

Where did you get the two-part exhausts from?

[mike1268]

[mike1268]

I think it's a common negative, but I don't want to risk burning it out ....lol

[RobW]

That looks different to the bit I could see. Think I'll need to take the turret off & have a better look - might be the weekend though.

[KTRob]

Hi Mike I am in the middle of pulling mine to bits, heres a pic of the wires in my turret:



Hope that helps

[mike1268]

Perfect, thanks

[mike1268]

2 part exhausts, tank zone. £5 for a pair