RC Tank Warfare community hobby forum

A little backstory to this, at the time of my purchase of the base, I didn't have a manual volume control button because the new HL tanks come with it on the transmitter, so when my board arrived just plugged in the speaker and hoped sound would play. Obviously nothing played, didn't bother me much though.

Today I got my volume control, a cheapo HL one I got from rctank.de as well as a speaker from them. PLugged everything in, went into the sd card, copied over the files from the folder I wanted, into the root, replaced existing files etc. Plugged it back into the board, turned it on and nothing. Now i'm just stumped on what to do next. Troubleshooting on the manual only states that I verify the ini files, well I did copy over and replace the sounds I wanted like it said. Not entirely sure what to do.

Is the microSD card installed properly? Or maybe the format of the microSD card Is wrong or corrupt.

Yeah, microsd is installed properly, clicks in and out just fine. I'm about to try reformatting it.

that didn't help

Is there any sound from the speaker at all even a slight hiss to verify the speaker and volume are connected correctly.

Also don't reformat with windows it 99% chance it won't be readable in the IBU2 afterwards.

Also is the speaker in the correct socket, i've none people plug it into the smoker socket as that is also next to the volume socket

Yeah it's in the correct socket, speaker makes a slight hiss sound when I turn it on

I have a guide on how to correctly format the sd card give me a minute to find it.

okay, thank you I appreciate it

I can't attach says file too large. PM me your email and I will send you it.