Way to get 360 Taigen rotation to not hit stuff!

This section contains tips and tricks on building and running model vehicles. If you know any then post them here and if you need to find any, try your first search here.
Forum rules
This section is for posting helpful Tips and Tricks only. Questions need to be posted within general questions section viewforum.php?f=14
Post Reply
tao
Staff Sergeant
Posts: 795
Joined: Wed Oct 17, 2012 1:08 am

Way to get 360 Taigen rotation to not hit stuff!

Post by tao »

I have my Panther G as many of you filled with electronics, TARR etc. That large black plug on the turret was getting caught up
with the speaker so I just removed the back stop on the rotation ring..cut away a little plastic behind it. (10 min job) then the plug was able to sit deeper in the turret and not catch as it rotated.
Top
tao
Staff Sergeant
Posts: 795
Joined: Wed Oct 17, 2012 1:08 am

Re: Way to get 360 Taigen rotation to not hit stuff!

Post by tao »

Oh as I try always fit the largest speaker enclosure...in this case Visaton FRS 8 in Taigen Panther G; I also moved the rotation motor out of the way to the front which is really easy on the 360 turret as it can fit anyplace along the ring gear.
Top
Post Reply

Return to “Tips and Tricks”