stug 3mantlet

[tanker 242]

Hi guys I managed to change the square mantlet to the pigshead one it was not easy as the pigshead did not come with any attachments,so after removing the square one I had to cut off the square part from the back plate with the attachments on the back & super glue this to the back plate on the pigs head mantlet, off you want to keep the infra red l.e.d you can put it in the drives vision port in place of the m/g l.e.d & move the m/g one to behind the shield on top of the stug & add a bit of fiberoptic through the shield with a piece of brass tube to give you a m/g . Tanker 242 .