Page 1 of 2

Clark boardsi have

Posted: Sun Dec 20, 2015 6:42 pm
by CHIEFSONN
I have both the tk 35 and the tk 22, my question to you guys is what is the max voltage I can use on them. And can the lipos be used.most of my batteries are 7.4 volt,nicad,Lopo,nicklemetal.the tanks will be equipeted with metal tracks sprockets etc. thanks for your reply

Re: Clark boardsi have

Posted: Sun Dec 20, 2015 7:12 pm
by jarndice
Hi, Most of my Tanks and all of my Aircraft use LI-PO Batteries,
As long as you are sensible with the way you charge, use and store them they are so much better than NICAD or NIMH,
Same size for twice as much power.
shaun.

Re: Clark boardsi have

Posted: Sun Dec 20, 2015 7:41 pm
by ALPHA
YES :thumbup:

ALPHA

Re: Clark boardsi have

Posted: Sun Dec 20, 2015 8:37 pm
by MichaelC
CHIEFSONN wrote:I have both the tk 35 and the tk 22, my question to you guys is what is the max voltage I can use on them. And can the lipos be used.most of my batteries are 7.4 volt,nicad,Lopo,nicklemetal.the tanks will be equipeted with metal tracks sprockets etc. thanks for your reply
CHIEFSON, I have been having an on going discussion with Clark himself with regards to this as I have blown 4-5 boards over the last 6 months. I have been exclusively lipo 2S, and he had to replace a SMD capacitor on all of them and had also sent me some just in case. He thinks that when I put fresh 2S in the voltage is simply too high.

What I have been doing is not fully charged my lipos. Fingers crossed as I haven't had one since but we should see.

Re: Clark boardsi have

Posted: Sun Dec 20, 2015 9:24 pm
by CHIEFSONN
So I should /can use 7.4 volt and no more.2cell not a 3 cell.thanks, I like my lipos they have more power and give you more space to use inside your tank

Re: Clark boardsi have

Posted: Sun Dec 20, 2015 9:27 pm
by MichaelC
Definitely not 3S and use with caution with 2S. I have seen some freshly charged 2S gives out over 8v initially and I think that might have been my problem.

I have also seen some freshly charged 3S gives up to 12.1v on my Turnigy radio.

Re: Clark boardsi have

Posted: Sun Dec 20, 2015 9:31 pm
by CHIEFSONN
So I should /can use 7.4 volt and no more.2cell not a 3 cell.thanks, I like my lipos they have more power and give you more space to use inside your tank

Re: Clark boardsi have

Posted: Sun Dec 20, 2015 9:31 pm
by CHIEFSONN
So I should /can use 7.4 volt and no more.2cell not a 3 cell.thanks, I like my lipos they have more power and give you more space to use inside your tank

Re: Clark boardsi have

Posted: Sun Dec 20, 2015 9:31 pm
by CHIEFSONN
So I should /can use 7.4 volt and no more.2cell not a 3 cell.thanks, I like my lipos they have more power and give you more space to use inside your tank

Re: Clark boardsi have

Posted: Mon Dec 21, 2015 1:35 am
by tomhugill
Thing is a freshly charged nimh will give 8.4v too but I guess it sags lower under load which a Lipo won't.