Page 1 of 2

Problem with HL Leopard 2 Airsoft Unit

Posted: Mon Nov 30, 2015 10:04 am
by ninelong
So I'm in a bit of a pinch here. When I turn on the airsoft switch on top of the turret, the thing won't stop shooting! It's like it has a really really angry autoloader! and it fires regardless of whether the "engine" is turned on; the difference is just that there's not sound and recoil if it's turned off. I've checked the contacts underneath the turret, the don't seem to be touching. Any ideas, gents? ???

Re: Problem with HL Leopard 2 Airsoft Unit

Posted: Mon Nov 30, 2015 2:12 pm
by forgebear
hi see if the 3 pin wire plug is round the wrong way in the top of the upper deck it fits just in front of the 8 pin
if this tank has one if not try the micro switch on the side of the bb unit maybe making contact all the time
dave

Re: Problem with HL Leopard 2 Airsoft Unit

Posted: Mon Nov 30, 2015 3:23 pm
by ninelong
I think the 3 pin plug is fine, considering that I haven't touched it. It was shooting fine before, so maybe it's something else? May I know where this microswitch is? Is it this one? Thanks!

Image

Re: Problem with HL Leopard 2 Airsoft Unit

Posted: Mon Nov 30, 2015 4:57 pm
by forgebear
hi yes thats it make sure its not making a permanent contact
dave

Re: Problem with HL Leopard 2 Airsoft Unit

Posted: Mon Nov 30, 2015 6:17 pm
by ninelong
Pried them apart and checked out the wires, no contact. Weird thing is that when I unplug that wire from the board, it still keeps firing!

Re: Problem with HL Leopard 2 Airsoft Unit

Posted: Mon Nov 30, 2015 7:00 pm
by forgebear
it sounds like you have a short somewhere do you have another transmitter just incase its that try see if that works it just a process of elimination dave

Re: Problem with HL Leopard 2 Airsoft Unit

Posted: Sat Dec 05, 2015 8:25 pm
by ninelong
Hello! So I pretty much tore it down top to bottom, couldn't find any shorts :( What gives? Could it be the switch on top of the turret? Or the board itself?

Re: Problem with HL Leopard 2 Airsoft Unit

Posted: Sat Dec 05, 2015 10:50 pm
by forgebear
hi try the 3 pin wire round the other way see if thats the problem just unplug it and turn it round
dave

Re: Problem with HL Leopard 2 Airsoft Unit

Posted: Sun Dec 06, 2015 9:10 am
by ninelong
Still no dice. :( Hmmm...

Re: Problem with HL Leopard 2 Airsoft Unit

Posted: Sun Dec 06, 2015 10:10 am
by forgebear
ok now we have done all this the only thing i can think is the rx i8 if you have a spare to wire up just to check it would be good
dave