m26e3 super pershing build
-
- Recruit
- Posts: 49
- Joined: Thu May 14, 2015 4:04 am
m26e3 super pershing build
1) cut finders, rear finders not squared off like actual super pershing. (Personal mod)
Last edited by Kevin York on Wed Jun 17, 2015 11:22 pm, edited 3 times in total.
-
- Recruit
- Posts: 49
- Joined: Thu May 14, 2015 4:04 am
Re: m26e3 super pershing build
Super pershing build...
I'm looking for info on the T81 tracks, or any track relitivly staight forwards to put on this...
I'm looking for info on the T81 tracks, or any track relitivly staight forwards to put on this...
- jarndice
- Colonel
- Posts: 8042
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: m26e3 super pershing build
Kevin If you need any help with your build I can think of nothing better than to go to HENG LONG Builds and use PALEPAINTERS "SUPER P" build as one of your sources of reference. It is very helpful in showing how to overcome some of the unique problems that this Rare model throws up. shaun
I think I am about to upset someone
-
- Recruit
- Posts: 49
- Joined: Thu May 14, 2015 4:04 am
Re: m26e3 super pershing build
Will do - thanks!
- wibblywobbly
- Major
- Posts: 6395
- Joined: Fri Oct 17, 2008 9:30 am
- Location: South Wales Valley
- Contact:
Re: m26e3 super pershing build
This is one of my favourite tanks, and as has been said there is an excellent build that you can use for inspiration (the best I have I seen anywhere really). Looking forward to plenty of pics.
RobG
RobG
Tiger 1 Late
Panther G
King Tiger
M36 B1
Panther G
King Tiger
M36 B1
-
- Recruit
- Posts: 49
- Joined: Thu May 14, 2015 4:04 am
Re: m26e3 super pershing build
1)extended inner airsoft tube.
2)used full length of brass tube for barrel.
3)cut armor-test fit.
Started the barrel mods...nothings glued yet, just putting up dates on the build. Tomorrow I'll work on the side armor/plates...if time let's me!!
Last edited by Kevin York on Tue Jun 16, 2015 9:55 pm, edited 1 time in total.
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7410
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: m26e3 super pershing build
Good Morning,
I love a good Pershing build ( when I'm not having to do it *winks* ). Following along!
regards,
Painless
I love a good Pershing build ( when I'm not having to do it *winks* ). Following along!
regards,
Painless
...Here for the Dawn...
-
- Recruit
- Posts: 49
- Joined: Thu May 14, 2015 4:04 am
Re: m26e3 super pershing build
I am awaiting plastic hl kv1 tracks. They look very similar to the t81. Hopefully the will work with little to no mods. I'll keep an up date on them when the come next week.
it's worth a try!!
it's worth a try!!
-
- Recruit
- Posts: 49
- Joined: Thu May 14, 2015 4:04 am
Re: m26e3 super pershing build
]I got the KV-1 tracks today. They fit and work well with m41a3 rear wheels. The stock pershing are to wide for the tracks. And will not aline in the sprokets holes. I am going to try to cut them down to see if that will work. Either way I'm happy with what I have now.
will need to modify m41a3 sprokets for channel so that the track keeps on wheel in heavy grass.I will go off the stock pershing wheel track channel-if I use this set up.
Everything lines up perfectly I may use heat to bend tracks outer most teeth down to resemble t81 tracks.alsoRe: m26e3 super pershing build
Looks like you're making a good start on this build.
I suggest, though, that you ditch the Bulldog sprockets and the KV-1 tracks. They look very wrong. Instead, try Kenny Kong's tracks (http://www.kennysmodeltank.com/page/acc ... page2.html) or a set from Impact (http://www.mitosal.com/M26Pershing.html or http://www.axels-modellbau-shop.de/kata ... :3010.html). Both make the correct sprocket and have solid reputations for making good gear.
If you want to go all out and cost is no issue, AFV model makes a nice track/sprocket set (http://www.afv-model.com/4711shop/produ ... cts_id=165).
AFV and Impact both make their setups for Tamiya. So, you may have to tweak your HL drive shaft to make them work. I don't know about Kenny's sprockets. You'd have to email and ask him.
I suggest, though, that you ditch the Bulldog sprockets and the KV-1 tracks. They look very wrong. Instead, try Kenny Kong's tracks (http://www.kennysmodeltank.com/page/acc ... page2.html) or a set from Impact (http://www.mitosal.com/M26Pershing.html or http://www.axels-modellbau-shop.de/kata ... :3010.html). Both make the correct sprocket and have solid reputations for making good gear.
If you want to go all out and cost is no issue, AFV model makes a nice track/sprocket set (http://www.afv-model.com/4711shop/produ ... cts_id=165).
AFV and Impact both make their setups for Tamiya. So, you may have to tweak your HL drive shaft to make them work. I don't know about Kenny's sprockets. You'd have to email and ask him.