turret ring 360 turning

Feel free to discuss anything and everything to do with tanking here!
User avatar
tanker 242
Corporal
Posts: 407
Joined: Sun Dec 09, 2012 5:14 pm

turret ring 360 turning

Post by tanker 242 »

:wave: hi guys have now done the turret ring fix [by cutting new teeth in the ring where the stop point was] for my kv1 & tiger1 ,& they work ok! :clap: so now have 360 deg: turning , :thumbup: will also do this on my pzr 4 & t-34/85 ,tanker 242.
User avatar
jackalope
Lieutenant
Posts: 3882
Joined: Fri Jun 20, 2014 7:42 pm
Location: Communist State of Maryland, United States.

Re: turret ring 360 turning

Post by jackalope »

Did the same thing for my Tiger and King Tiger, not sure why they come with that silly block anyway.
User avatar
jarndice
Colonel
Posts: 8399
Joined: Mon Sep 03, 2012 11:27 am
Location: the mountains of hertfordshire

Re: turret ring 360 turning

Post by jarndice »

Jack I think that HENG LONG et al were aware that had they fitted 360 degree turret rings they would very quickly have amassed claims from those new to the hobby who in the excitement of opening the box and straightaway spinning the turret around ripping out the wiring thought that fitting a limiter to the turret ring would save them money.Whereas people who alter the ring to 360 are very aware of its limitations and so are less likely to damage the wiring. :thumbup: shaun
I think I am about to upset someone :haha:
User avatar
jackalope
Lieutenant
Posts: 3882
Joined: Fri Jun 20, 2014 7:42 pm
Location: Communist State of Maryland, United States.

Re: turret ring 360 turning

Post by jackalope »

jarndice wrote:Jack I think that HENG LONG et al were aware that had they fitted 360 degree turret rings they would very quickly have amassed claims from those new to the hobby who in the excitement of opening the box and straightaway spinning the turret around ripping out the wiring thought that fitting a limiter to the turret ring would save them money.Whereas people who alter the ring to 360 are very aware of its limitations and so are less likely to damage the wiring. :thumbup: shaun
I hadn't thought of that, makes perfect sense. :thumbup:
User avatar
Merlin707
Corporal
Posts: 457
Joined: Sun Oct 26, 2014 1:10 am
Location: Lincoln
Contact:

Re: turret ring 360 turning

Post by Merlin707 »

If you look for a seller on ebayncalled dingding, he sells the wiring needed with a rotating connector so your wires won't rip out.
He's doing a sale atm for £17
Razor 1, Intercept Bogies Angels 2 5, Cleared Hot Engage, Fox 2 Fox 2

Semper In Faecibus Sumus Sole Profundum Variat

HL/Tamiya Sherman - Bulldog Turreted
Taigen Tiki Tiger 1
Torro KingTiger
E-25 Tank Destroyer
strmnd54
Lance Corporal
Posts: 214
Joined: Mon May 24, 2010 3:00 am

Re: turret ring 360 turning

Post by strmnd54 »

Slip rings have gone down in price quite a bit in the last 2 years...

http://www.ebay.ca/itm/300Rpm-Capsule-S ... 417d06689c
Heated debates on climate changes contribute to global warming!!!
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: turret ring 360 turning

Post by ALPHA »

strmnd54 wrote:Slip rings have gone down in price quite a bit in the last 2 years...

http://www.ebay.ca/itm/300Rpm-Capsule-S ... 417d06689c
Cool device....does it come with a schematic 8O a lot of colored wire there...but an optimum solution...have only done 360 rotation on one of my tanks...and that was because I could implement Cupotea's crossbar trick :D

ALPHA
User avatar
tanker 242
Corporal
Posts: 407
Joined: Sun Dec 09, 2012 5:14 pm

Re: turret ring 360 turning

Post by tanker 242 »

I just use a mini cable tie to keep the wires from twisting & I only do one 360 turn in either direction , tanker 242.
RobW
Warrant Officer 2nd Class
Posts: 1218
Joined: Mon Sep 29, 2014 2:55 pm
Location: Sheffield

Re: turret ring 360 turning

Post by RobW »

ALPHA wrote: Cool device....does it come with a schematic 8O a lot of colored wire there...but an optimum solution...have only done 360 rotation on one of my tanks...and that was because I could implement Cupotea's crossbar trick :D

ALPHA
Colour in = colour out

So I would expect the hard bit to be fitting it somewhere so it doesn't foul? As well as butchering any travel locks?
strmnd54
Lance Corporal
Posts: 214
Joined: Mon May 24, 2010 3:00 am

Re: turret ring 360 turning

Post by strmnd54 »

I installed one of these in my H.L. Pershing a couple years ago and posted a thread on this forum:

viewtopic.php?f=22&t=9204

Slip rings were like $40.00 with shipping then...

Every tank now a day should come with 360 degrees turret rotation...

After all; without 360 rotation; a tank is a jagpanzer with a wide deflection. :haha: :haha:
Heated debates on climate changes contribute to global warming!!!
Post Reply

Return to “General Discussion”