MG on Tiger I
Posted: Mon Nov 17, 2014 1:26 pm
Does anyone know how or have an indea to install a moving MG on a Tiger I?
From Guido Henn's Tiger Build:
http://www.rctankwarfare.co.uk/forums/v ... 21&t=12235
RC Tank Warfare community hobby forum
RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/
MG on Tiger I
https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=13955
Page 1 of 2
Re: MG on Tiger I
Posted: Mon Nov 17, 2014 2:07 pm
Re: MG on Tiger I
Posted: Mon Nov 17, 2014 2:09 pm
Where about's on the Tiger will the MG be installed, Turret, hull or cupola? shaun
Re: MG on Tiger I
Posted: Mon Nov 17, 2014 2:54 pm
The turret one is fixed, pintle is not really possible to do, only the hull is doable.jarndice wrote:Where about's on the Tiger will the MG be installed, Turret, hull or cupola? shaun
Re: MG on Tiger I
Posted: Mon Nov 17, 2014 3:13 pm
Tom you and I know that, but does the person posing the question know that 
shaun
shaunRe: MG on Tiger I
Posted: Mon Nov 17, 2014 3:54 pm
HERR FRITZ..did this awhile ago...this is his post
http://www.rctankwarfare.co.uk/forums/v ... TZ#p105085
recommend watching the video ..he did a really good job
ALPHA
http://www.rctankwarfare.co.uk/forums/v ... TZ#p105085
recommend watching the video ..he did a really good job
ALPHA
Re: MG on Tiger I
Posted: Tue Nov 18, 2014 3:08 am
I am talking about the hull MG. I know that the turret MG is fixed.
Re: MG on Tiger I
Posted: Tue Nov 18, 2014 3:27 am
Thanks for the tips. What I am trying to do is mount a movable hull MG. I am building a Christian Ludwig's Tiger I kit as a very early production tank. I hope I can count with the good advice of those who really want to help.
Re: MG on Tiger I
Posted: Tue Nov 18, 2014 3:39 am
If you go to http://www.etoarmour.com
click on the menu and select tiger 1, scroll down and you will get to a fully functioning hull ball mg assembly, now the downsides, It is incredibly expensive, it is very fiddly and you will have to shim the ball to ensure a proper fit and worst of all you will then have to provide all the electrics to drive it remotely, I bought one and wished I had saved my money, A 10mm plastic childs bead drilled to take the barrel of an led equipped mg34 fitted in accordance with TFTM's HENG LONG Tiger 1Subpage 2 of HENG LONG BUILDS "BUILDING A MID PRODUCTION NORMANDY TIGER" build which I did with my next Tiger 1 was far cheaper easier and more realistic.
shaun
click on the menu and select tiger 1, scroll down and you will get to a fully functioning hull ball mg assembly, now the downsides, It is incredibly expensive, it is very fiddly and you will have to shim the ball to ensure a proper fit and worst of all you will then have to provide all the electrics to drive it remotely, I bought one and wished I had saved my money, A 10mm plastic childs bead drilled to take the barrel of an led equipped mg34 fitted in accordance with TFTM's HENG LONG Tiger 1Subpage 2 of HENG LONG BUILDS "BUILDING A MID PRODUCTION NORMANDY TIGER" build which I did with my next Tiger 1 was far cheaper easier and more realistic.
shaunRe: MG on Tiger I
Posted: Tue Nov 18, 2014 3:47 am
HMMMMMMMMMMMMMMMMjarndice wrote:If you go to http://www.etoarmour.com
click on the menu and select tiger 1, scroll down and you will get to a fully functioning hull ball mg assembly, now the downsides, It is incredibly expensive, it is very fiddly and you will have to shim the ball to ensure a proper fit and worst of all you will then have to provide all the electrics to drive it remotely, I bought one and wished I had saved my money, A 10mm plastic childs bead drilled to take the barrel of an led equipped mg34 fitted in accordance with TFTM's HENG LONG Tiger 1Subpage 2 of HENG LONG BUILDS "BUILDING A MID PRODUCTION NORMANDY TIGER" build which I did with my next Tiger 1 was far cheaper easier and more realistic.
....I wonder who reminded someone of that bead mount 
.............. 
ALPHA