MG on Tiger I

cfredbandeira · Post by **cfredbandeira** » Mon Nov 17, 2014 1:26 pm

Does anyone know how or have an indea to install a moving MG on a Tiger I?

MichaelC · Post by **MichaelC** » Mon Nov 17, 2014 2:07 pm

From Guido Henn's Tiger Build:

http://www.rctankwarfare.co.uk/forums/v ... 21&t=12235

jarndice · Post by **jarndice** » Mon Nov 17, 2014 2:09 pm

Where about's on the Tiger will the MG be installed, Turret, hull or cupola? shaun

tomhugill · Post by **tomhugill** » Mon Nov 17, 2014 2:54 pm

jarndice wrote:Where about's on the Tiger will the MG be installed, Turret, hull or cupola? shaun

The turret one is fixed, pintle is not really possible to do, only the hull is doable.

jarndice · Post by **jarndice** » Mon Nov 17, 2014 3:13 pm

Tom you and I know that, but does the person posing the question know that

shaun

ALPHA · Post by **ALPHA** » Mon Nov 17, 2014 3:54 pm

HERR FRITZ..did this awhile ago...this is his post
http://www.rctankwarfare.co.uk/forums/v ... TZ#p105085
recommend watching the video ..he did a really good job

ALPHA

cfredbandeira · Post by **cfredbandeira** » Tue Nov 18, 2014 3:08 am

I am talking about the hull MG. I know that the turret MG is fixed.

cfredbandeira · Post by **cfredbandeira** » Tue Nov 18, 2014 3:27 am

Thanks for the tips. What I am trying to do is mount a movable hull MG. I am building a Christian Ludwig's Tiger I kit as a very early production tank. I hope I can count with the good advice of those who really want to help.

jarndice · Post by **jarndice** » Tue Nov 18, 2014 3:39 am

If you go to http://www.etoarmour.com
click on the menu and select tiger 1, scroll down and you will get to a fully functioning hull ball mg assembly, now the downsides, It is incredibly expensive, it is very fiddly and you will have to shim the ball to ensure a proper fit and worst of all you will then have to provide all the electrics to drive it remotely, I bought one and wished I had saved my money, A 10mm plastic childs bead drilled to take the barrel of an led equipped mg34 fitted in accordance with TFTM's HENG LONG Tiger 1Subpage 2 of HENG LONG BUILDS "BUILDING A MID PRODUCTION NORMANDY TIGER" build which I did with my next Tiger 1 was far cheaper easier and more realistic.

shaun

ALPHA · Post by **ALPHA** » Tue Nov 18, 2014 3:47 am

jarndice wrote:If you go to http://www.etoarmour.com
click on the menu and select tiger 1, scroll down and you will get to a fully functioning hull ball mg assembly, now the downsides, It is incredibly expensive, it is very fiddly and you will have to shim the ball to ensure a proper fit and worst of all you will then have to provide all the electrics to drive it remotely, I bought one and wished I had saved my money, A 10mm plastic childs bead drilled to take the barrel of an led equipped mg34 fitted in accordance with TFTM's HENG LONG Tiger 1Subpage 2 of HENG LONG BUILDS "BUILDING A MID PRODUCTION NORMANDY TIGER" build which I did with my next Tiger 1 was far cheaper easier and more realistic. shaun

HMMMMMMMMMMMMMMMM

....I wonder who reminded someone of that bead mount

..............

ALPHA

RC Tank Warfare community hobby forum

MG on Tiger I

MG on Tiger I

Re: MG on Tiger I

Re: MG on Tiger I

Re: MG on Tiger I

Re: MG on Tiger I

Re: MG on Tiger I

Re: MG on Tiger I

Re: MG on Tiger I

Re: MG on Tiger I

Re: MG on Tiger I