RC Tank Warfare community hobby forum

Hi Guy's

Could anyone tell me a good brand of servo, and where to buy them..

Thanks

Jake

Hi jake,
Well it depends what you want to use it for. High speed or high torque. I would say futaba but there are a few brands out there. What radio are you using. If it is just for normal use I would say an S3003 or S3001 this one has a bearing on the out put shaft the 3003 is the standard servo. Hope this is of help to you. Most radio control shops will stock a range of servos. Go online and you should find lots there. Brian...

Hi Jake,
I forgot to say one of you best shops is Hobbystores, Brian...

This has been sorted now..

Thank you Brian for your help, much appreciated..

Hi Jake,

If your just after it for recoil etc then a simple micro servo will do you. Search "micro servo" in ebay and you find one delivered for a few £'s.

I don't bother with the metal geared ones, as tend to be more expensive noisy and jam up easier.

Ian.

Thanks Ian, figured out what was needed now, cheers

Jake