Servo's

[Jake79]

Hi Guy's

Could anyone tell me a good brand of servo, and where to buy them..

Thanks

Jake

[brizo58]

Hi jake,
Well it depends what you want to use it for. High speed or high torque. I would say futaba but there are a few brands out there. What radio are you using. If it is just for normal use I would say an S3003 or S3001 this one has a bearing on the out put shaft the 3003 is the standard servo. Hope this is of help to you. Most radio control shops will stock a range of servos. Go online and you should find lots there. Brian...

[brizo58]

Hi Jake,
I forgot to say one of you best shops is Hobbystores, Brian...

[Jake79]

This has been sorted now..

Thank you Brian for your help, much appreciated..

[Tankbear]

Hi Jake,

If your just after it for recoil etc then a simple micro servo will do you. Search "micro servo" in ebay and you find one delivered for a few £'s.

I don't bother with the metal geared ones, as tend to be more expensive noisy and jam up easier.

Ian.

[Jake79]

Thanks Ian, figured out what was needed now, cheers

Jake