FEIFAL AIR CLEANERS.

[jarndice]

I saw this on another Forum and it really is worth passing on, When unclipping the back of your TIGER 1 upper from the lower hull there is always the worry that you will damage the clips holding the intake pipes or harm the interface between the plastic or whatever the substitute used as an intake pipe and the air cleaner. SIMPLE! 1/cut 5mm off the end of the intake pipe (and put the remnant to one side for later) and 5mm off the end of the articulated plastic pipe coming out of the air cleaner, 2/superglue a 5mm NEO-DYNIUM MAGNET inside the intake pipe and superglue another MAGNET on the end of the sawn off articulated pipe and use the 5mm cut off remnant intake pipe to sheath over that magnet, all you have to do in future is when wanting access is unlock or unscrew depending on what you usually do, and then simply lift away the articulated pipe from the intake pipe. (credit to RC UNIVERSE) shaun