based on the drawings from Trojca 's "Panther Variants in Color" I want to start here with the construction of Coelian .
They tried to construct a multiple anti-aircraft tank based on the Panthers. The design which has brought it the most , was the Coelian . He had 2x 37mm Flak 43 in a fully-armored turret. It was made ??with the wooden tower was a prototype based on a Panther D . Production should already begin in late '44 , but was continually delayed until they finally gave up the construction , as the firepower compared to the weight was too low.
The Coelian , the engineer of the development department at Rheinmetall was Lieutenant von Glatz - Goetz and his third first name was Coelian , was developed in January 1944 and launched in March 1945 in Grimsby / Saxony. He was actually called device 554 and Coelian was the cover name .
Thus after the setting of the project of ball lightning is the only anti-aircraft tank . All other anti-aircraft guns were pure self-propelled guns , no anti-aircraft tank ( Whirlwind & Co.)
Who would like to see the Kugelblitzbaubericht times , here is a [url = ' http://mmodell.de/forum/index.php?page= ... eadID=3721 '] ??LINK [ / url ] !
Since it can be assumed that the tower would be been made ??, the G version would have put this I'm going to get my bearings in the above sketch.
If the plan .....
At the scheduled technology :
-11.1 Lipo
Charging sockets
opposite - RCC using a servo
Height Align Servo about including parallel Bewegeung Odometer
ElMod - Pro module
I vacillate between sound still Beier and ElMod Blaster
- Henntec chain tensioner
Impact gear ( let's see if that really are so loud
)The base is a Tamiya Panther G chassis and be the ProfLine conversion kit. Well Andrew, I finally begin to saw your former Panther * grin *
Unfortunately, the Panther has been so with some super glue or something "amplified" that I tried some swearing and snorting to solve any screws or parts. : eeeek :
The 37mm cannon from the kit were replaced with new ones.
The diameter of the Turmauschnitts Tamiyaoberwanne is too large and has been reduced to the level of the kit is thought .
I have attached thereto a Polyplatte on the upper hull , made ??a narrow Polyring in the appropriate diameter, and then poured the gap with Stabelit . Even the holes in the tower rolls were completed.
After drying the Poylplatte was removed from the upper hull . Hardly what to fill and beautiful stable.
The tower rolls have to be removed they would still be visible in the front tower reports .
The tower now fits smacking . Time NEN few loose parts put together . Already looks quite nice ...
The speaker was first scattered with a Visaton FRS7 .
Still get the hub caps from Scale Fanatic
Times over a short critical view of the tower :
Unfortunately, my blistered or holes
not so bad , but still not nice. The plate collisions must be nachgraviert .
What annoys me more because , the fact is that the upper and lower roller shutter ( or whatever you would like to call it ) is missing on the hinged Geschuetzaufnahme simply .
The Geschuetzaufnahmen already roughly ausgefraest and drilled the holes for the 37's in the visor.
The pipes are to move later on a sled .
At the tail already begins with the conversion in inventory parts.
So on it goes soon
greeting
Ralf
