main gun recoil

[rayzzer-b]

HELLO""all ". now i not dum but can anyone that has dun the recoil servo conversation "HELP" how do the wires fit to the tx board is it a strait connect or more of a mine field ?? any pearls of wisdom thanks ...

[TKcommander]

Don't think you can fit servo recoil unless you have a control board like the CLARK or similar. If you do it is plug and play.

[rayzzer-b]

Don't think you can fit servo recoil unless you have a control board like the CLARK or similar. If you do it is plug and play.

thanks TK" i did think ther must be something more to i just no one actually say so the clark board has the connections to recoil an elevate ,, oh well still going to do some improvements to the H,L. see if i can slow down that snap shutt noise ,, always makes me think the barrel going to fly out , cheers TK"

[MichaelC]

If you are using RX-18 the Asiatam recoil is a good option. It is much more realistic and the timing of the flash is actually correct. It is a little tricky to put on, depends on which barrel you have.

[Tankbear]

Add a MAKO2 board gives you servo recoil to the RX18.

Here's a list of features it can add to your RX18 tank. Also see http://rctanksaustralia.com/shop/index. ... cts_id=217

NEW FEATURES:

Onboard ATRC - fixes the annoying track recoil effects
Recoil servo support - for realistic cannon recoil effect
Cannon LED flash support
REMORA Wireless support - send updates on your tanks battle state to the REMORA Command Center
Diagnostic LCD support - connect a LCD to view your MAKO2 setup and stats
MFU selection - choose between Heng Long or Taigen MFUs for optimal performance
Coup de gras selection - turn on or off the Coup de gras function
Speed reduction in line with battle damage when connected to a RC2HL V3 board

IR BATTLE FEATURES:
Using a SONY TV compatible remote control the user can choose to battle as one of 8 different tank types:

Light, medium or heavy battle tank
Light , medium or heavy repair tank (Bergepanzer)
Super heavy MAUS battle tank
Automatic Bergepanzer

[MichaelC]

Wow didn't realized MAKO2 supports servo recoil........ Thanks Ian ! Learn something new everyday. That will get me thinking about my two Taigen tanks......

[Tankbear]

Wow didn't realized MAKO2 supports servo recoil........ Thanks Ian ! Learn something new everyday. That will get me thinking about my two Taigen tanks......

Yep the MAKO2 doesn't get much praise but offers a lot of features.

Ian.

[ALPHA]

Hey Ray... HENG LONG does sell a recoil that will plug into your Rx 18.... the STUG comes with it.. and a few of their other IR models I'm going to try to put one in my KV-2 once I have all the internal alignments are adjusted and set ...just thought I'd throw that in there as the unit itself is about 12.00 US with shipping...in the UK .. I think forgebear has them for about the same


http://www.ebay.co.uk/itm/Heng-Long-1-1 ... 58a86a4b6a
http://www.ebay.com/itm/Henglong-tank-b ... 5ae36d6c3d
ALPHA

[rayzzer-b]

thanks a lot '' guys '' i no all about the H,L recoil all my tanks have it '' just as TK" said cant fit servo's to H,L m'f'u' it not like it ,,,,, well put up with it a bit longer see if i can soften the slamming noise ,, a bit ,and again thanks all ..

[ALPHA]

thanks a lot '' guys '' i no all about the H,L recoil all my tanks have it '' just as TK" said cant fit servo's to H,L m'f'u' it not like it ,,,,, well put up with it a bit longer see if i can soften the slamming noise ,, a bit ,and again thanks all ..

LOL ...oh...you wanted to soften the sound ...if you're brave... open the unit and put an "o" ring on the part that returns it forward it'll dampen the impact of the plastic hitting plastic

Really though I barely notice it on my Stug...the recoil in the tracks... engine sound ..etc drown it out ...another option..is not standing so close lol (just kidding )

ALPHA