Internal ariel HL ... correct wire ?

[Wildboar44]

Hi Tankers .......... one for the electro wiz kids . !

I can work out electronic problems like Hussain Bolt can run the 100m in flip flops ! ....... so my question is , after much deliberation
I think i need to make an internal ariel for my HL Tiger 131 project , the mechanicals of building it im ok with , but what type of copper
wire do you use for the ariel itself , it is just stripped copper stranded wire or will it need to be solid ? .. eg diameter , length ect .. ?

I think 190mm transmitter board to ariel post and 190mm ariel i think is correct from reading posts is the norm , but which type of wire ?

Thanks Guy's n Girls

.

[Robert Davies]

Just basic multicore insulated wire, as close as you can manage to that which joins the HL receiver board to the base of the external aerial.

A lot of people, myself in the past included, took a length of that wire and wrapped around a 4" or so length of plastic tube within the tank to save space.

A final note - keep the antenna as far away from motors as possible - which includes turret rotation, elevation and airsoft (if fitted), the smoker, and of course the main drive motors - I found that the turret motors were far and away the most 'radio noisy' of them all. The battery can also blank out the aerial too, if you fit the aerial too low in the hull.

-Rob

[Red Devils]

Hey buddy,

Check out these links, I think they will answer your question.

http://www.rcuniverse.com/forum/m_94058 ... tm#9405898

http://www.rcuniverse.com/forum/m_10258246/tm.htm

http://www.onlineconversion.com/frequen ... length.htm

http://www.rcuniverse.com/forum/m_87074 ... tm#8707869

Hope this helps...

Derek

[Robert Davies]

Are you suggesting that my advice is incorrect?

Hey buddy,

Check out these links, I think they will answer your question.

http://www.rcuniverse.com/forum/m_94058 ... tm#9405898

http://www.rcuniverse.com/forum/m_10258246/tm.htm

http://www.onlineconversion.com/frequen ... length.htm

http://www.rcuniverse.com/forum/m_87074 ... tm#8707869

Hope this helps...

Derek

[Red Devils]

No I'm not suggesting your info is wrong, I'm just offering Gordo some additional information. Cool your jets there trooper.

Derek

[Wildboar44]

Hey Robert Davies , thanks for the advice , thats a very comprehensive reply much appreciated . Red Devils is a very friendly
Tanker adding the post with as much information as possible , he is always helpfull as you will find the members of this forum are


Great info Guy's .... im off to build the little blighter tonight ....

.