3cell LiPo vs RX18

This section contains tips and tricks on building and running model vehicles. If you know any then post them here and if you need to find any, try your first search here.
Forum rules
This section is for posting helpful Tips and Tricks only. Questions need to be posted within general questions section viewforum.php?f=14
Post Reply
User avatar
Battlechip
Recruit
Posts: 27
Joined: Sat Oct 06, 2012 7:03 am
Location: Perth Western Australia

3cell LiPo vs RX18

Post by Battlechip »

Hi All, due to Tankbears overvoltage test, I had to at least try my 3cell. It is a Trakpower 4900mAh 25c 11.1volts fully charged is 12.63volts. In the past I found electric vehicles to run cooler with more voltage and lower wound motors(brushless). I ran this straight off the charger, So far everything is fine with no fan and full volume so I will test it properly tomorrow (maybe) if it doesnt smoke up like the smoke machine does,I will try a motorcycle 12v battery.cheers
3cell LiPo Vs RX18.jpg
3cell LiPo Vs RX18.jpg (76.87 KiB) Viewed 1050 times
12v Vs RX18.jpg
12v Vs RX18.jpg (66.9 KiB) Viewed 1050 times
You can get much farther with a kind word and a gun, than you can with just a kind word-Al Capone
Top
User avatar
Battlechip
Recruit
Posts: 27
Joined: Sat Oct 06, 2012 7:03 am
Location: Perth Western Australia

Re: 3cell LiPo vs RX18

Post by Battlechip »

Hi All, I've run the 12volt m/cycle battery today no problems (yet) still to try under load. I haven't bothered with a fan yet.Also the smoke machine now sounds like a turbo.I will continue with testing as I want a Benedini sound unit anyway. I am wondering if using a speed controller on the electric motor on the smoke machine ,is good idea or no. cheers
You can get much farther with a kind word and a gun, than you can with just a kind word-Al Capone
Top
Post Reply

Return to “Tips and Tricks”