RC Tank Warfare community hobby forum • Simple Brass Machinegun

Page 1 of 1

Simple Brass Machinegun

Posted: Sun Oct 21, 2012 12:08 pm

by Battlechip

Gday Fellas, I didnt see the point of the original machinegun and ive got some of this brass tubing around,so I just knocked this up in front of the TV and it only took about 35mins.Ive used 3.15mm and 4mm tube (not to scale) I used a fine drill and pencil file,and flanged the muzzle by placing a small length onto a countersunk 3mm bolt and backing a nut upto it.

: Original gun.jpg (42.6 KiB) Viewed 1411 times

: Brass Machinegun.jpg (45.79 KiB) Viewed 1411 times

: Brass Machinegun2.jpg (47.51 KiB) Viewed 1411 times

Re: Simple Brass Machinegun

Posted: Sun Oct 21, 2012 4:43 pm

by streetfighterjeff

that looks fantastic. take it you drilled the bigger bore and then slid over the small bore. what sixe drill did you use? jeff

Re: Simple Brass Machinegun

Posted: Mon Oct 22, 2012 1:34 am

by Battlechip

Hi Jeff, I used a 1.5mm drill bit and then used the pencil file to get the holes more accurate coz my drilling wasn't that good. Cheers

Re: Simple Brass Machinegun

Posted: Sat Nov 03, 2012 1:35 pm

by Battlechip

Hi, I decided to put the led in coz it fits

: MG with LED.jpg (60.45 KiB) Viewed 1319 times

Re: Simple Brass Machinegun

Posted: Tue Nov 13, 2012 12:29 am

by Dietrich

That is an incredible piece of work considering that the MG is so small

Really well done..Its almost a pity to have painted it..
Alb.