LI-PO battery Usage with Tamiya DMD/MFU

Talk about all other types of electronics here, such as batteries!
Post Reply
User avatar
X82d Pathfinder
Corporal
Posts: 364
Joined: Tue May 24, 2011 3:43 am
Location: Colleyville, TX.

LI-PO battery Usage with Tamiya DMD/MFU

Post by X82d Pathfinder »

I noted that someone here had asked about using Li-Po with a Tamiya electronics. Novak Li-Po Smart Stop #5470 works for this application. The issue lies in the battery not dropping below 6V, thus damaging the battery and/or burning up. Here is the fix for this issue. It's a cut off, which even incorporates an LED that flashes then turns solid blue when you are at 6.2V.

-Dan
Attachments
Smart Stop LI-PO Battery Voltage Cut Off.jpg
A Commander has to make vital decision on incomplete information in a matter of seconds, and afterwards the experts can sit down at leisure, with all the facts before them, and argue about what he might, could or should have done.- Sir William Slim
Top
Post Reply

Return to “Other electronics”