XRAD'S JAGDTIGER
Re: XRAD'S JAGDTIGER
Tractor red paint. Very close to original primer from pics I have seen. It has a earthy dark red tone. It is gloss, but will be dulled down later. 'Secret Weapon' makes 2mm brass etched numbers. Perfect for scale casting marks. If you click on the 2nd pic, look closely at the vent casting for the numbers.
Re: XRAD'S JAGDTIGER
OK..found a way to make rough cast look to plastic plates. Using rust O x paint, if you repaint 24 hours later for second coat, it will cause the old coat to expand creating millions of tiny ridges. Not what i wanted, but it looks OK. And it will help hold dirt and dust in place...
Big problem is the can;s spray nozzle sucks and clogs every two sprays. So i used on from another can. much more volume now...
this is called farm tractor red or something like that...
Big problem is the can;s spray nozzle sucks and clogs every two sprays. So i used on from another can. much more volume now...
this is called farm tractor red or something like that...
-
- Sergeant
- Posts: 501
- Joined: Wed Jun 15, 2011 8:31 pm
- Location: Uk
Re: XRAD'S JAGDTIGER
Very nice . Great attention to detail.Its going to turn out great when its all finished.
Man will occasionally stumble over the truth, but most of the time he will pick himself up and continue on.
~~~Winston Churchill~~~
~~~Winston Churchill~~~
Re: XRAD'S JAGDTIGER
been looking around....do you have a sorce on this? I was watch this and it really looks like its a 2 wheel boggie system...xrad wrote:That is correct. double bogies on the elefant, single wheels on the JT.
http://www.youtube.com/watch?v=aInlsZ2g ... re=related
Re: XRAD'S JAGDTIGER
this Bovington JT has the porsche suspension. one of the early ones with zimm.
There are 2 wheels per bogie set, not 2 pairs (4 wheels) like on the elefant.I call them 'single' wheel type, meaning 'per axle'
No source yet for these bogies...(only the elefant type) which will not be easily converted as the design is different.
There are 2 wheels per bogie set, not 2 pairs (4 wheels) like on the elefant.I call them 'single' wheel type, meaning 'per axle'
No source yet for these bogies...(only the elefant type) which will not be easily converted as the design is different.
Re: XRAD'S JAGDTIGER
a few more things done:
Scale hardware small screws. get the wrench too, makes life easier..
few fenders each side. tracks tensioned. you really only need about 12 spare links per side (for the spares...the original tracks were long enough as is...or I needed to only add 1 link..can't remember..)
spare tracks will be ground a little so they lay more flat.
Scale hardware small screws. get the wrench too, makes life easier..
few fenders each side. tracks tensioned. you really only need about 12 spare links per side (for the spares...the original tracks were long enough as is...or I needed to only add 1 link..can't remember..)
spare tracks will be ground a little so they lay more flat.
Re: XRAD'S JAGDTIGER
Hmmm. I think you have mounted the spare tracklinks the wrong way. It's suppose to be like this.....


Re: XRAD'S JAGDTIGER
Yep, I realized this after posting the pics, they are already changed around and fit perfectly.
Great find on the JT porsche wheels!
Great find on the JT porsche wheels!
Re: XRAD'S JAGDTIGER
some more building...hand painted..will add mud and dirt and final touches.