Page 5 of 15

Re: Cheap Tiger 1. Not so Cheap

Posted: Wed Jul 26, 2023 7:18 am
by Meter rat
Jofaur86 wrote: Tue Jul 25, 2023 10:10 pm :lolno: Malbec
Malbec is a black grape variety used in the production of red wines. It is one of the six grape varieties authorized in the blends of Bordeaux reds, in particular because of its color and the robustness of its tannins. It is planted mainly in Cahors, in the south-west of France. :thumbup:

Great if it works, a few minor tweaks left? what's the problem with hindsight?
Attached photos Tiger I Tamiya, information on mounting the gun recoil,
https://www.google.co.uk/imgres?imgurl= ... B0AAAAAECc

Every day is a school day. I never said I had taste.
The problem is the micro switch highlighted.
830C5D38-01DC-462D-9334-4BF7D81C38CB.jpeg
830C5D38-01DC-462D-9334-4BF7D81C38CB.jpeg (109.78 KiB) Viewed 16232 times
This had an internal fault. It has now been replaced, and as of this morning is working.
Herr Dr. Professor wrote: Wed Jul 26, 2023 4:38 am [quote="Meter rat" post_id=341665 time=<a href="tel:1690312232">1690312232</a> user_id=9562]Today it ran under its own power. Took it into work and one of the residents helped build up the lower. They all have degrees of dementia. This gentleman was a Royal Engineer, and his mechanical skills had not diminished. His only comment “bloody German tank”.
:clap: :clap: :clap: Meter Rat, what a wonderful thing you have done to enrich the life of one who suffers from dementia! :clap: :clap: :clap:
[/quote]

I am only the handy person/driver/grounds person. It becomes very rewarding when we do something different with then. He remembered many antidotes and stories, so I had a very pleasant afternoon with him. One of the care staff said he was more animated for the afternoon, than he had been Ffor some time.

Re: Cheap Tiger 1. Not so Cheap

Posted: Wed Jul 26, 2023 12:20 pm
by Jofaur86
:) Well then, if everything works? it's great, you will have a lot of fun, to make evolve :thumbup:

Re: Cheap Tiger 1. Not so Cheap

Posted: Tue Aug 01, 2023 11:21 am
by Meter rat
Next dumb ass question. And I realise there will be as many answers as there are folk on the forum. After what seems like endless days of filling and sanding. I hope at the weekend to start fitting some PE clasps for the tools. How do people go about it? After main paint? Pinned to the deck? Made around the tools? As this is my first time using PE, I am looking for some guidance and ideas.

Re: Cheap Tiger 1. Not so Cheap

Posted: Tue Aug 01, 2023 12:18 pm
by HERMAN BIX
Im nit a P.E. guru, but what I have done I reckon is best to put on before main paint, but from a practical point, I made the clamps and fitted them after main paint by gently scraping a spot off & super gluing them in place with the tools. The tools themselves are little artworks with wooden handles etc, seems a shame to try to paint them after they are covered by a main coat of base & camo !!

Re: Cheap Tiger 1. Not so Cheap

Posted: Wed Aug 02, 2023 7:25 pm
by Meter rat
After what seamed like days of filler and sanding the first coat of etch primer went on, and allowed to dry for a couple days. As it was reasonably warm, and little wind, it felt like a good time to get on the red oxide. A start has been made on painting some of the smaller parts. So far completed the jack block, one tow hook thing and the main part of the jack.
615F41F3-598B-43D1-AB10-16854D398041.jpeg
615F41F3-598B-43D1-AB10-16854D398041.jpeg (75.22 KiB) Viewed 16129 times
F30A5CAC-E1C3-4F77-AA84-DC5BFAB75EF5.jpeg
F30A5CAC-E1C3-4F77-AA84-DC5BFAB75EF5.jpeg (100.82 KiB) Viewed 16129 times
89C3C173-1E32-4B10-BB39-599AD249C99B.jpeg
89C3C173-1E32-4B10-BB39-599AD249C99B.jpeg (96.96 KiB) Viewed 16129 times
8B52200E-F83E-49DA-9009-262B1F753642.jpeg
8B52200E-F83E-49DA-9009-262B1F753642.jpeg (117.62 KiB) Viewed 16129 times


I have been permission to use the remains of the hobby boss tank chassis to build something, sort of science fiction, with one of the gentlemen at the day centre. All our service users and residents have dementia. This build will be made of cardboard and scrap, as I work for the council so there is no money. Any donations of scrap parts that can be repurposed would be greatly appreciated?

Re: Cheap Tiger 1. Not so Cheap

Posted: Wed Aug 02, 2023 9:45 pm
by Ad Lav
Always good to get some paint on it!

Re: Cheap Tiger 1. Not so Cheap

Posted: Wed Aug 02, 2023 10:17 pm
by HERMAN BIX
That’s come along in giant leaps from where you started !
Any thoughts on its final paint scheme?

Re: Cheap Tiger 1. Not so Cheap

Posted: Thu Aug 03, 2023 10:27 am
by Meter rat
Mr Bix. I think it will be grey, as per the Tamiya build manual for Abt, 503. With the number 321 for Von Rosen’s tank. However there does seem to be some doubt,as to whether this units tanks were grey or sand coloured. So not sure yet. The plate in Tiger 1 , on the Eastern Front shows it in Sand, and the book Panzer Ace describes the delivery “ as great grey beasts”. I have seen a tank from another unit which I quite fancy in grey with white over it. I need to do some further looking at details. For someone who thought Tiger models were too “common” and everyone and his dog has built one, I now understand why they have a fascination. I am thoroughly enjoying it. More to follow if you are all still awake?

Re: Cheap Tiger 1. Not so Cheap

Posted: Thu Aug 03, 2023 10:29 am
by Ad Lav
There is new information out there stating that all Tiger tanks were in fact dunkel gelb, and dunkel Grau was field applied.

I have the source somewhere will post it.

Re: Cheap Tiger 1. Not so Cheap

Posted: Thu Aug 03, 2023 3:45 pm
by Meter rat
Ad Lav wrote: Thu Aug 03, 2023 10:29 am There is new information out there stating that all Tiger tanks were in fact dunkel gelb, and dunkel Grau was field applied.

I have the source somewhere will post it.
Why, oh why did you have to tel me that? That will give me a reason to ask a whole new lot of dumb ass questions when I get around to the top coats. If you could find the source, that would be appreciated. I think I could have some fun with the paint.