Hi If you have a Tamiya compatable battle system ,you could market this now ,there is a shortage of Tamiya compatable battle systems that will fit other tanks.
Do you have a price for the electrics.
I fully understand that making everything compatable so it fits other models is very hard ,just take sprocket drive Tamiya has two flats to drive the sprocket , Heng Long has one flat,so swopping gearboxes from one to the other, has problems normaly means changing the sprocket and possibly the tracks.
You didnt state if you are going to make them as kits or if they will be fully assembled.Some people would like them as kits others fully built.
regards pete
Making a 1/16TH metal tiger I
Re: Making a 1/16TH metal tiger I
I agree with having the 'kit' option.
Re: Making a 1/16TH metal tiger I
Hi Pete,
Thanks for your information. Our model parts are mostly based on real tiger 1 earlier version. To be honestly, we didn't use tamiya tank as our reference. But if tamiya have a precision size as real tank. I don't think there will be a problem to use our parts as a replacement item.
Best Regards,
Jack
Thanks for your information. Our model parts are mostly based on real tiger 1 earlier version. To be honestly, we didn't use tamiya tank as our reference. But if tamiya have a precision size as real tank. I don't think there will be a problem to use our parts as a replacement item.
Best Regards,
Jack
Re: Making a 1/16TH metal tiger I
We're moving forward...
- Attachments
-
-
- Mantlet with MG34
-
- hull-front view-with MG34
-
- hull-rear view
-
- hull-front view
-
[ICE]monkey
- 2nd Lieutenant
- Posts: 2669
- Joined: Wed Sep 10, 2008 5:58 pm
- Location: pluckley ,ashford ,kent
Re: Making a 1/16TH metal tiger I
looking realy good , what does it weigh in at ?
Re: Making a 1/16TH metal tiger I
We will weigh it as it is finnished.
The one has finnished before weighs less 10kg. I think this new tiger I will over 10kg.
The one has finnished before weighs less 10kg. I think this new tiger I will over 10kg.
Re: Making a 1/16TH metal tiger I
Updating...
- Attachments
-
- EXHAUST PIPE SHIELD
- Pipe shield.jpg (124.03 KiB) Viewed 3130 times
-
- SPROCKET
- hull-sprocket.jpg (72.14 KiB) Viewed 3130 times
-
- REAR DETAILS
- hull-rear with details.jpg (49.49 KiB) Viewed 3130 times
-
- EXHAUST PIPE
- hull-EXHAUST PIPE.jpg (69.16 KiB) Viewed 3130 times
Re: Making a 1/16TH metal tiger I
Fantastic work. 
Hope the production run is similar.
Hope the production run is similar.Re: Making a 1/16TH metal tiger I
Thanks xrad. It will.xrad wrote:Fantastic work.
keep updating...
- Attachments
-
- MG34 detail2-front view
- MG34-detail2.jpg (43.26 KiB) Viewed 3100 times
-
- MG34 detail1-side view
- MG34-detail1.jpg (40.51 KiB) Viewed 3100 times
Re: Making a 1/16TH metal tiger I
Hi I must say you are doing a top notch job,the quality jumps out at you when looking at the photos.
You asked what sort of sounds we like the best on the market at the moment is El-Mod here is a link to there site http://www.el-mod.de/" onclick="window.open(this.href);return false; this system is even better than Tamiya DMD/MF Units .The sounds can be modified by the user to suit his tastes stored on a SD card then they play back when hooked up to the tank.
You Havnt said if you will be suppling these tanks in kit form or assembled,If they came assembled alot of guys would strip them down to paint them.
regards pete
You asked what sort of sounds we like the best on the market at the moment is El-Mod here is a link to there site http://www.el-mod.de/" onclick="window.open(this.href);return false; this system is even better than Tamiya DMD/MF Units .The sounds can be modified by the user to suit his tastes stored on a SD card then they play back when hooked up to the tank.
You Havnt said if you will be suppling these tanks in kit form or assembled,If they came assembled alot of guys would strip them down to paint them.
regards pete
