New project, StuG III with Winterketten.

[Meter rat]

Someone justify one to me. Has to have a genuine back story and unusual for some reason.

[Rob59]

Hello Tankers, about time for a little update on this StuG project.
Work to do: the Schürzen.
Both the hulls have to be tight together, so there are no gaps here and there between them.
If I would have layed them just on top of each other, not thightened, the Schürzen might hang at different heigths.
They still are not screwed onto each other so I thightend them with a few tie-wraps.

IMG_8950.jpeg (2.41 MiB) Viewed 357 times

IMG_8951.jpeg (1.94 MiB) Viewed 357 times

Because I want both the first Schürze on each side begin at the same spot on each side, I taped a wooden skewer onto the bow of the upper hull

IMG_8953.jpeg (2.05 MiB) Viewed 357 times

[Rob59]

After bending and drilling I could hang the first one onto the hooks, against the skewer up front

IMG_8964.jpeg (388.26 KiB) Viewed 357 times

And the other 3 followed

IMG_8965.jpeg (194.48 KiB) Viewed 357 times

IMG_8966.jpeg (247.91 KiB) Viewed 357 times

IMG_8967.jpeg (238.03 KiB) Viewed 357 times

[Rob59]

Next step, bending some brass strips to make hooks which I screwed onto the mudguards with 1.4mm screws and nuts.
Not scale I know, but this has prooved itself during outdoor runs with my other Panzers with Schürzen!
I never lost anything and nothing ever broke off.

IMG_8955.jpeg (2.17 MiB) Viewed 357 times

IMG_8957.jpeg (2.19 MiB) Viewed 357 times

IMG_8959.jpeg (1.88 MiB) Viewed 357 times

IMG_8960.jpeg (2.26 MiB) Viewed 357 times

[Rob59]

This is how the StuG is at the moment.
Next step will be bending and drilling again, so I can secure each Schürze onto a hook at the mudguards.
When that has been done too, I can attach some minor things onto the upper hull and start thinking about its paintjob.
CU next time guys.
Rob

[Herr Dr. Professor]

I'm watching, Rob59. I find Winterketten so nasty looking and I would like someday to have a Stug with Schürzen. For now, I noticed your idea to use zip ties to hold the hulls together. I struggled with just that problem on the Chaffee I'm working on. Now why didn't I think of that?

[Rob59]

Sometimes things can be sooo simple, you do not even think about it.
Rob.

[Rob59]

G‘day folks.
Proceeded with the Schürzen.

IMG_8982.jpeg (1.71 MiB) Viewed 283 times

IMG_8983.jpeg (2.12 MiB) Viewed 283 times

IMG_8984.jpeg (2.15 MiB) Viewed 283 times

IMG_8989.jpeg (2.14 MiB) Viewed 283 times

IMG_8991.jpeg (2.02 MiB) Viewed 283 times

[Rob59]

And the lefthand side

IMG_8995.jpeg (2.05 MiB) Viewed 281 times

IMG_8999.jpeg (1.92 MiB) Viewed 281 times

IMG_9001.jpeg (2.09 MiB) Viewed 281 times

IMG_9002.jpeg (1.86 MiB) Viewed 281 times

IMG_9003.jpeg (1.88 MiB) Viewed 281 times

IMG_9004.jpeg (2.81 MiB) Viewed 275 times

[Rob59]

Here are 2 pics, showing the difference between Winter-and Ostketten:

IMG_9006.jpeg (285.14 KiB) Viewed 277 times

And Winter-Normalketten:

IMG_9005.jpeg (289.36 KiB) Viewed 277 times