RC Tank Warfare community hobby forum

Posted: **Tue Apr 17, 2012 8:31 pm**

fitting to turret top.

: 46b.JPG (34.96 KiB) Viewed 920 times

cut back the plastic webbing on recoil unit (x4) then extend the other side of recoil unit with plastic /brass tube. the unit should now fit in the turret mountings,

: 50.JPG (47.64 KiB) Viewed 920 times

i used plastic card as spacers to center up the mantlet with the turret sides.then a bit of sanding to fit

: 48.JPG (42.32 KiB) Viewed 920 times

done 50p for metal mantlet/recoil unit from spares box .

Posted: **Thu Apr 19, 2012 9:29 pm**

Hi all, slight modification to the noisey smoke unit

: 51.JPG (35.29 KiB) Viewed 911 times

Posted: **Fri Apr 20, 2012 9:37 pm**

used old hull mountings from pantiger to fit the smoke unit in place.

: 52.JPG (47.41 KiB) Viewed 906 times

: 56.JPG (46.47 KiB) Viewed 906 times

Posted: **Mon Apr 23, 2012 10:43 pm**

started the painting.

: 53.JPG (67.66 KiB) Viewed 894 times

: 54.JPG (75.85 KiB) Viewed 894 times

: 55.JPG (86.77 KiB) Viewed 894 times

RC Tank Warfare community hobby forum

rebuild

Re: rebuild

Re: rebuild

Re: rebuild

Re: rebuild