Page 3 of 3
Re: Panzer 1 Builds
Posted: Wed Nov 27, 2024 2:45 am
by jee
wow awesome
Re: Panzer 1 Builds
Posted: Wed Nov 27, 2024 10:52 pm
by Herr Dr. Professor
"...so I built a brass idler arm.... I then made a Delrin insert...the shock absorber is a 4 mm brass rod turned down to 1mm.... The top cap is shaped to fit into the slot in the hull. The bottom cap has a 1mm hole in so that there is a tail in it to fit into an elongated slot hole cut in the swing arm."
Dogberry: I am so far from your level of skill that I can only gasp with my jaw hanging open. I read and admire...and admire...and admire...
Re: Panzer 1 Builds
Posted: Wed Nov 27, 2024 11:35 pm
by Panzermechaniker
Yes that is awesome engineering on display.
Re: Panzer 1 Builds
Posted: Thu Nov 28, 2024 2:50 pm
by Winterhammermodels
Great build.
I designed the gearbox. AS you mentioned, printing the cone gears could be Not so easy.
But great solution with the Brass gears.
I used recycled Pla for the gears, an they are stronger than petg printed gears.
Re: Panzer 1 Builds
Posted: Thu Nov 28, 2024 4:23 pm
by Dogberry
Winterhammermodels
Can I commend you on a well thought out solution to fitting motors to the Tacom Panzer 1 hull. I admire your work. I like your gearboxes.
Re: Panzer 1 Builds
Posted: Fri Mar 14, 2025 3:38 pm
by MonsieurTox
I like it very much, you did an awesome job converting it to RC !
Re: Panzer 1 Builds
Posted: Fri Mar 14, 2025 11:58 pm
by Meter rat
Great builds.
Re: Panzer 1 Builds
Posted: Sat Mar 15, 2025 12:35 am
by MrChef
Such Awesome work Dogberry
I've always wanted to do a Panzer II.