Page 3 of 3
Re: E-75 105mm (Tamiya/Elmod)
Posted: Thu Aug 15, 2024 7:38 am
by Ad Lav
Very neat work! You can add the cast numbers to the C clamps if you want to add more detail
Re: E-75 105mm (Tamiya/Elmod)
Posted: Mon Aug 19, 2024 10:37 am
by Keere
Herr Dr. Professor wrote: ↑Wed Aug 14, 2024 10:17 pm
That replication of welds next to flame cuts is amazing. Either there is some extremely clever hand-held hot die (and the knife in the earlier photo is to mislead us) or Keere, you are the world's most patient modeler. And those neatly marked containers of hardware suggest the latter.
thanks, it is indeed a time consuming job. but it makes the details much nicer.
i will do a hobby room tour sometime, but here are 2 pictures
- 455856605_907342384752759_67630567291926430_n.jpg (170.87 KiB) Viewed 2710 times
- 453995546_1238845707006120_1857199744155115401_n.jpg (414.6 KiB) Viewed 2710 times
Re: E-75 105mm (Tamiya/Elmod)
Posted: Mon Aug 19, 2024 10:40 am
by Keere
Ad Lav wrote: ↑Thu Aug 15, 2024 7:38 am
Very neat work! You can add the cast numbers to the C clamps if you want to add more detail
That is indeed a very good idea, I have not come across that yet, do you have any idea where these can be purchased?
Re: E-75 105mm (Tamiya/Elmod)
Posted: Mon Aug 19, 2024 11:13 am
by Ad Lav
I purchased my letters from eBay - I’ll try and find a link for you.
Re: E-75 105mm (Tamiya/Elmod)
Posted: Wed Aug 21, 2024 9:20 am
by Keere
more weldings, this were finally the last one
- 436731437_281150245091178_5162796886081661318_n.jpg (69.34 KiB) Viewed 2649 times
rear hatch mounted
- 441870419_1589130858540707_372412724151501088_n.jpg (100.74 KiB) Viewed 2649 times
spare track holders mounted
- 441940575_1527015584891198_1935028804719922727_n.jpg (118.81 KiB) Viewed 2649 times
Re: E-75 105mm (Tamiya/Elmod)
Posted: Wed Aug 21, 2024 12:37 pm
by Ecam
Your welds look better than I can produce on the farm (or on my models). Fantastic work!
Re: E-75 105mm (Tamiya/Elmod)
Posted: Wed Aug 21, 2024 1:05 pm
by Ad Lav
Re: E-75 105mm (Tamiya/Elmod)
Posted: Wed Aug 21, 2024 6:04 pm
by tankme
Excellent looking details...
Re: E-75 105mm (Tamiya/Elmod)
Posted: Sun Sep 01, 2024 3:24 am
by John Glover
Love this build Mate. I have a similar build started with a 105mm barrel which I obtained from MK Modellbau. Would you mind telling me how thick is the plasticard you used on the front and at what angle you set it at. Regards John.