Page 3 of 7

Re: Help connecting elmod pro on torro tank...

Posted: Sat Sep 19, 2020 5:24 pm
by Jofaur86
On the radio you have to be in Airplane fonction :thumbup: not Helico ,mode :thumbdown: ,then there is mode 1/2/3/4 position of the sticks in relation to channels,used 1 or 2 according to taste.
So depending on the mode chosen,channels not even pace on sleeves

Re: Help connecting elmod pro on torro tank...

Posted: Sat Sep 19, 2020 6:13 pm
by Andreabert
thanks Jofaur
i did as u told me..
but.. the turret is working. up down/left right
the engine no. i cannot start it. when i check in the elmod app, in the Receiver page, if i move the right stick up and down , i can see the connected channel 1 working.
the channel 2 is not working. so left/right on the right stick is like dead

Re: Help connecting elmod pro on torro tank...

Posted: Sat Sep 19, 2020 6:23 pm
by Andreabert
ok. just a little step... the engine start.. but.. on right stick.. up/down on the stick are left /right on the tank
left/right on the stick doent do nothing.

when u told me i have to be in airplane mode, do u mean i have to go on the setup and choose airplane setup?

Re: Help connecting elmod pro on torro tank...

Posted: Sat Sep 19, 2020 6:29 pm
by Andreabert
nooopw. i use airplaine mode...but
now the engine start with left stick and when i push right the right stick the traks start movin and i have to switch off the tank to stop

Re: Help connecting elmod pro on torro tank...

Posted: Sat Sep 19, 2020 6:50 pm
by Andreabert
So.... aorry to bother u guys but really i dont know what to do.

Now it almost work all... except steering.
The channel one ( left/right on right stick) work on radio, but in app it is not detected...
It doesnt work

It like i should enable or tell to radio to send the signal to the receiver

Re: Help connecting elmod pro on torro tank...

Posted: Sat Sep 19, 2020 7:17 pm
by Jofaur86
Yes airplane mode,start engine stop right stick OK :D an impulse 2/3 secondes stick down and quick impulsion stop 1 seconde on right stick OK :D the recoil system and the machine gun ? Are they connected? We are goung forward :thumbup:
I would look on mine tomorrow to confirm .
Memory start,and stop,right stick diwn fir the 2 functions ? ?

Re: Help connecting elmod pro on torro tank...

Posted: Sat Sep 19, 2020 7:22 pm
by Andreabert
Wait wait lol
I still have the problem with the drive. The tank can move only forward and backward with the right stick ( un and down).
I cant move left or right cause if i move the stick nothing happen

Re: Help connecting elmod pro on torro tank...

Posted: Sat Sep 19, 2020 8:23 pm
by Jofaur86
:{ :O sorry,said some nonsense....
Vertical ritght stick 2/3 secondes up,Start
Vertical left stick ,one impulsion down, stop and gas
Horizontal right ,rot.turret
Vertical left stick,up fast ,canon,recoil and flash,down maintened ,machine gun
Horizontal right,left ,direction
Just checked on my turntable

Re: Help connecting elmod pro on torro tank...

Posted: Sat Sep 19, 2020 8:38 pm
by Andreabert
mine do:

vertical right stick up: start engine , turn right
verticart right stick down. off engine, turn left

orizz right stick: NOTHING

vertical left stick up: cannon up
vertial left stick down: cannon down

orizz left stick right/left: turret right or left

Re: Help connecting elmod pro on torro tank...

Posted: Sat Sep 19, 2020 9:33 pm
by Jofaur86
Check the settings if the radio menu and setup reglages ,see if all the servos settings are at 0 ( neutral ) if no one wich is reversed ( reverse ) if not a mix channels?? Is also necessary that all the élements are connect,it us a BB shot ir unfrared battle systems ? It is weird to have start and rightg left ditto green stick ? Previous lessage is inducated what colir is wath function ,if not spitted the functions with SERVO ??be complicated,like playing lottery 8O
Already be sure of the correct settings of the radio,it us not " plug and play " like the origine Taigen,or Torro