Page 3 of 3
Re: Mato Numpty
Posted: Thu Jan 03, 2019 5:53 pm
by Dark46
Cheers Rob appreciate that advice
Re: Mato Numpty
Posted: Fri Jan 04, 2019 8:29 am
by cannedheat
you can fit a RX18 unit in it, rip out the old, the only thing you will have to play with, is the wiring in the turret swop about a bit to get it to work on the rx18 can be done if you get stuck you can pass it on to me it is my first yearly birthday next month ...I have 3 ....
Re: Mato Numpty
Posted: Fri Jan 04, 2019 8:35 am
by forgebear
hi if you do go rx18 be sure to take the capacitors off the gearbox motors as it will blow the rx18
Re: Mato Numpty
Posted: Fri Jan 04, 2019 8:50 am
by cannedheat
forgebear wrote:hi if you do go rx18 be sure to take the capacitors off the gearbox motors as it will blow the rx18
I must have had some luck dave, but I have heard this, how we doing
Re: Mato Numpty
Posted: Fri Jan 04, 2019 9:25 am
by Dark46
I have had a 5 min go by putting a Taigen V3 set in and it ran fine . But I've not worked out the wiring on the turret side so haven't tried that yet.
Obviously at some stage the gearboxes and plastic wheels and track will be replaced.
Re: Mato Numpty
Posted: Fri Jan 04, 2019 10:21 am
by forgebear
cannedheat wrote:forgebear wrote:hi if you do go rx18 be sure to take the capacitors off the gearbox motors as it will blow the rx18
I must have had some luck dave, but I have heard this, how we doing
yep good canned and you
Re: Mato Numpty
Posted: Thu Jan 10, 2019 6:20 am
by Kaczor
Cheapest way to obtain cast hull M4A1 Sherman
Unfortunately delivery cost to Poland are way too high (almost half of model price)...