RC Tank Warfare community hobby forum

Many thanks. I'm glad that you guys enjoy my work. Until the finish will some reports still follow...

Some mistakes were self-made by me. I’d receive a hint from another modeller; this should now be removed. My Tiger belongs to the 2. company of the LAH, they have as below to see the unit marks directly at the Zimmerit coat painted; at the 3. company was it as at my Tiger before.



The old markings were sanded and the areas prepared to apply Zimmerit coat.





As at my king tiger I’ve used again Apoxie Sculpt for the Zimmerit coat.





The first side is ready…



…and simultaneously also the filling at the front plate.



Also the defects around the Rommelkiste were at this way removed.





At the left side were continued and the tank again mounted and especially at the track cable ensured, that holders and tensioner are still functioning.







Thereafter a search for some other mistakes around the Tiger.







And I’ve found something – at the rear side the same mistake as at the front plate.



Additionally I‘ve noticed, that at all pictures of this unit the binocular gunsight was shown. In January 1944 the unit receive their last Tiger 1; the monocular gunsight was used since March 1944.



These mistakes were next time removed.

I admire your skills and ability to reproduce such outstanding results. Truly outstanding

Just outstanding!

There's more detail in the track cable than on all my tanks put together!

Bill

hotte8487 wrote:Some mistakes were self-made by me. I’d receive a hint from another modeller; this should now be removed. My Tiger belongs to the 2. company of the LAH, they have as below to see the unit marks directly at the Zimmerit coat painted; at the 3. company was it as at my Tiger before.



The old markings were sanded and the areas prepared to apply Zimmerit coat.





As at my king tiger I’ve used again Apoxie Sculpt for the Zimmerit coat.





The first side is ready…



…and simultaneously also the filling at the front plate.



Also the defects around the Rommelkiste were at this way removed.





At the left side were continued and the tank again mounted and especially at the track cable ensured, that holders and tensioner are still functioning.







Thereafter a search for some other mistakes around the Tiger.







And I’ve found something – at the rear side the same mistake as at the front plate.



Additionally I‘ve noticed, that at all pictures of this unit the binocular gunsight was shown. In January 1944 the unit receive their last Tiger 1; the monocular gunsight was used since March 1944.



These mistakes were next time removed.

Looking good hotte8487 Sweet details and the Zimmerit looks cool!!! That much Zimmerit must have put a couple cramps in your knuckles
Keep up the great work!!

Without any plan I’ve built another part. From a rest of a brass profile,…



…a screw M1,…



…and a toothpick arise a hand crank.



This is part of the starter crank and is at a late Tiger located beside the antenna socket.







Some other trivial things were changed. My monocular gunsight was changed to a binocular gunsight.





At the rear were the unit markings removed; at the left side also the zimmerit coat,…



…at the right side only the decal.





Another change at the turret; the gaps between turret roof resp. turret floor and gun shield were reduced; not really scale but it looks better for me.





I hope I’ve all mistakes removed and it can go on with painting – next time.

This is a museum quality build it is just perfect in every way possible mate

c.rainford73 wrote:This is a museum quality build it is just perfect in every way possible mate

I do what I can Carl.

Took my time to look through the whole topic. Great, especially the turret ring. Well also the different details. Bravo!

...it goes on.
After a few considerations I’ve decided me against a new painting and only to do supplement at the camouflage pattern. All side skirts, the rear fenders, the new air intake, the idler wheels and a few road wheels were dismounted and then in dark yellow brushed.



The repair at the upper hull and turret was made in mounted state. As usually I’ve brushed green and brown camouflage stripes.



With the help of worn effects from AK Interactive were again a few defects within the camouflage stripes represented.







Thereafter it goes on with the rear number at the „Rommelkiste“ and the German crosses at both sides. Used were again my own adhesive film.



The stencil below were brushed in flat black,…



…and above flat white.



At the German cross were the adhesive film removed,…



…the second for the white outline glued and was also in white brushed; here the result left…



…and here right.



The turret number receive their red inner colour.



Thereafter I worked with three different filters. The flakes in the zimmerit coat were with red brown brushed.







With pollution in the area of the lower hull it goes next time on.