Page 14 of 19

Re: Panther G on the Eastern Front 1945

Posted: Tue Aug 20, 2013 10:27 pm
by maxmekker
top work on the exhaust color/rust tones

Panther G on the Eastern Front 1945

Posted: Fri Aug 23, 2013 6:38 pm
by hotte8487
After the exhaust system, it goes straight on at the rear plate. Here I've added a few more signs of aging, a few runners, but again very discreet.
Much is there not to say, so again only pictures...
pic383.JPG
pic384.JPG
pic385.JPG
pic386.JPG
pic387.JPG
pic388.JPG
pic389.JPG
pic390.JPG
This was also again only a little step and I think the time of big steps is now again ended... :(

Re: Panther G on the Eastern Front 1945

Posted: Fri Aug 23, 2013 6:53 pm
by maxmekker
well it's soon time for a video Hotte, so we can se tis master piece move around and hear the roar from the Elmod system :-)

tell me, did you ever do drawings for the front fenders ? I'm transfering the drawings I got from you into cad and hope to get my friend to fire up the machine again sonn to do the side Boards.

Re: Panther G on the Eastern Front 1945

Posted: Sat Aug 24, 2013 3:38 pm
by hotte8487
maxmekker wrote:well it's soon time for a video Hotte, so we can se tis master piece move around and hear the roar from the Elmod system :-)

All in the Timing. :)

tell me, did you ever do drawings for the front fenders ? I'm transfering the drawings I got from you into cad and hope to get my friend to fire up the machine again sonn to do the side Boards.

Hi Stian, because I have used the original front fenders I haven't made any drawings of them, I'm sorry. I think the construction is a bit more difficult as the side fenders, but not impossible.

Panther G on the Eastern Front 1945

Posted: Sat Aug 24, 2013 10:05 pm
by hotte8487
In the interim are all handles added, also the tow ropes and the rope for the chains. And also without many words, again pictures…
pic391.JPG
pic392.JPG
pic393.JPG
My little wooden block, or also called wooden suitcase...
pic394.JPG
pic395.JPG
Some things are already dry brushed, like the C-hooks…
pic396.JPG
…and now the left side…
pic397.JPG
pic398.JPG
pic399.JPG
Always only little steps, but the end comes closer...

Re: Panther G on the Eastern Front 1945

Posted: Sat Aug 24, 2013 10:28 pm
by Red Devils
Great attention to detail Hotte, excellent weathering effects...

Derek

Re: Panther G on the Eastern Front 1945

Posted: Sun Aug 25, 2013 12:07 am
by hotte8487
Red Devils wrote:Great attention to detail Hotte, excellent weathering effects...

Derek

Thank you for your nice comment Derek. A few little steps are still to make and they will follow soon.

Panther G on the Eastern Front 1945

Posted: Sun Sep 01, 2013 7:02 am
by hotte8487
Hello guys,

again a few details added, the Panther has received periscopes, thereof again a few pictures…
pic400.JPG
pic401.JPG
pic402.JPG
pic403.JPG
…it will slowly...
pic404.JPG
A little addendum, the turret has at the inside also received interior color.
pic405.JPG
And here a bit closer for the details at the rear turret hatch like weld lines, reinforcements for the lock and right the holder of an eyelet for padlock.
pic406.JPG
Finally have the periscopes at the inside also received color, however at this picture not to see…

Panther G on the Eastern Front 1945

Posted: Mon Sep 02, 2013 11:24 pm
by hotte8487
Still not the final working, because I had to eliminate a few little mistakes.
After a couple of times opening the commander's hatch I have to realize, that the original swivel arm is not strong enough. This was indicated by a little break line at the arrow.
pic407.JPG
As material for the repair I've taken flat brass 10 x 3 mm.
pic408.JPG
The blank for the swivel arm is ready and the lid of the turret hatch was milled…
pic409.JPG
Then a first test with the parts on the turret, so should it go...
pic410.JPG
It follows the mounting of the parts...
pic411.JPG
pic412.JPG
Everything fits and works well…
pic413.JPG
pic414.JPG
Another small correction was made on the antenna foot. Tamiya has here 4 bolts mounted, but after short exchange of ideas with Jeff (many thanks again) and a look on many photos shows only 3 bolts on the type G (a few also with four bolts), but WeCoHe and Schumo Kits have also taken the latter variant. That’s why I made it too and it is also not a big problem. Old bolts cut off with a scalpel, drilled three small holes and screw heads M 0.8 glued in.
pic415.JPG
And again color thereon…
pic416.JPG
So, I hope I have now reached the point, to start with the final working.

Re: Panther G on the Eastern Front 1945

Posted: Sat Sep 07, 2013 8:04 am
by hotte8487
Eastern Front wrote:Hotte,

Boy this is a real nice build... I really like coming back to this and marvelling over the detail...
A good way to weather the tow cables that I use, is to paint them flat black then use a real thinned out rust and let it flow into the cable, then I use the Tamiya grease (from the 3 color compact) and rub the surface from there, it looks awesome...

Cheers!
Thanks Eastern Front for the nice comment. To the tow ropes, I find, that rusted tow ropes are not really real. I have in my profession (hydraulic engineering, vessels, shipyard) many with wire cables to do and I know, that they become darker during use, but they rust only after many years and then already lying on a scrap heap.
But it's not a problem, each of us has it's own opinions and so should it be. :thumbup: