My Crusader

[Stormbringer]

Yes, those are "transfers" of the sort used by model railroaders for a long time. Many here on RCTW dislike them vociferously. I find that rub-on transfers, used correctly, cannot be distinguished from painted markings, except, perhaps, that they are even crisper in outline. The only truly better means is inaccessible to most of us without oodles of pounds sterling/dollars/yuan/etc.: "pad printing" (actually now using sophisticated paint printers). Those can be so clear as to make 1/16 warning labels legible with magnification.
The problem with HengLong and Torro/Taigen transfers is usually inaccuracy or anachronism. From what I can tell transfers are reasonably accurate. However, I do not pretend to any expertise on the accuracy of the markings, only what I can find in my book(s).

Ahh ok thx mate
ive never done railway models so Ive learnt something new

[Stormbringer]

Started adding the detail parts and this is where i am up to tonight

20250919_234643.jpg (779.61 KiB) Viewed 856 times

20250919_234616.jpg (786.83 KiB) Viewed 856 times

[Stormbringer]

Thats the detail parts added now

20250920_181105.jpg (990.53 KiB) Viewed 838 times

20250920_181032.jpg (894.52 KiB) Viewed 838 times

20250920_181011.jpg (1.08 MiB) Viewed 838 times

Just need to weather it and give it a spray of matt varnish
What sort of colours for desert dust and general weathering should i use ?

[Stormbringer]

I have noticed theres 2 handles missing tho
1 from the removable bit over the smoker filler and on same part on opposite side
there are spare handles on the sprues but they are wrong size ( quite a few extra bits on sprues )
will make a couple out of wire or hunt through the spares box
Ohh i had to cut a bit of the filler tube as well as it gets kinked when top hull is attached

[tankme]

I noticed the same thing with the handles on the rear deck. I made them out of some metal wire. It's funny that they drilled the holes for the handles, but didn't actually include them.

[Stormbringer]

yeh probably an oversight lol
but must admit im really impressed with the quality and detail on this wee tank its just so damm nice
ok it may not be strictly accurate (could be wrong here lol) but compared to other rtr's its really good

[Stormbringer]

Did some dusting up of the Crusader using the Tamiya weathering pigments
I found using a paint brush and dry brushing it onto the tank gave a nice effect i also scraped some of the little tablet in the box and used it wet for various bits (and Elsa the works supervisor inspecting the work)
Anyway enough waffle and heres the pics

w1.jpg (887.91 KiB) Viewed 299 times

w2.jpg (858.51 KiB) Viewed 299 times

w3.jpg (1011.67 KiB) Viewed 299 times

w4.jpg (1.1 MiB) Viewed 299 times

Also fitted the 2 missing handles off the middle hatches

w5.jpg (710.37 KiB) Viewed 299 times

[PainlessWolf]

Alan!
Looking Good! Tamiya Weathering Powder sets are a Fave of mine.
regards,
Painless

[Stormbringer]

Cheers Painless

[Herr Dr. Professor]

Painless: a suggestion: pop over to the Crusader Support Group pages viewtopic.php?p=377389&hilit=Crusader#p377389. Maybe you could add in your photos and explain exactly which of the Tamiya Weathering Powders you used: such as "I used the Tamiya Sand and Light Sand Weathering Powders." maybe adding that sentence before "I applied the powders with a paint brush and dry brushing to create a nice effect. I also scraped some of the little tablet in the box and used it wet for various bits."