RC Tank Warfare community hobby forum

Hello. As long as the tk board you have is 4ch type, you are set on the operation of both sticks to activate all functions
here is the operations on 2 different stick modes ( 4ch )


here is the difference on 4ch and Sbus



so yes as mentioned the sbus operation ( using Flysky I6S radio) is much more easy

maxmekker wrote: ↑Sun Jan 26, 2025 7:46 pm Hello. As long as the tk board you have is 4ch type, you are set on the operation of both sticks to activate all functions
here is the operations on 2 different stick modes ( 4ch )
so yes as mentioned the sbus operation ( using Flysky I6S radio) is much more easy

No. That is not correct. You can set the er9x radio for triggering the functions with the switches and only the switches as I did in the video. It is indeed a bit tricky, but doable, and as a proof, my video posted in the thread.

Rad_Schuhart wrote: ↑Sun Jan 26, 2025 8:08 pm

maxmekker wrote: ↑Sun Jan 26, 2025 7:46 pm Hello. As long as the tk board you have is 4ch type, you are set on the operation of both sticks to activate all functions
here is the operations on 2 different stick modes ( 4ch )
so yes as mentioned the sbus operation ( using Flysky I6S radio) is much more easy

No. That is not correct. You can set the er9x radio for triggering the functions with the switches and only the switches as I did in the video. It is indeed a bit tricky, but doable, and as a proof, my video posted in the thread.

you are 100% there, I jumped the gun.
lets just say my post was if you dont know ore want to get into it , programing of radio to get a 4ch up and running with dials and switches

Hello, and thank you very much for your help after watching and translating a number of YouTube videos, still not able to understand how it works? Isn't the radio to blame? plus me who doesn't understand anything... So I'll do it with the 2 sticks as before. Thank you for taking the time to respond. Have a nice weekend