RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/
https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=35629
Which Clark board do you have?Exhibitedbrute wrote:So it turns out I was running the tests with a board that does not support dklm gearboxes. Thank chaps I will Finnish up on the a1 which is now running, just needs set up and try again with the Clark’s board for it
It was bought about 2 years ago but shows and other projects got in the way
Tk60 supports dklm gearbox. Actually I think all Clarks support the mixing aspect, however the tk40 and below can hack the 550 motors current draw and goes into thermal shut down. Tk50 is fine howeverExhibitedbrute wrote:It was bought about 2 years ago but shows and other projects got in the way
Tom,tomhugill wrote: ↑Sun Feb 25, 2024 1:35 pmTk60 supports dklm gearbox. Actually I think all Clarks support the mixing aspect, however the tk40 and below can hack the 550 motors current draw and goes into thermal shut down. Tk50 is fine however.Exhibitedbrute wrote:It was bought about 2 years ago but shows and other projects got in the way
This is the one you need for the dklm type gearboxtankme wrote:Tom,tomhugill wrote: ↑Sun Feb 25, 2024 1:35 pmTk60 supports dklm gearbox. Actually I think all Clarks support the mixing aspect, however the tk40 and below can hack the 550 motors current draw and goes into thermal shut down. Tk50 is fine however.Exhibitedbrute wrote: It was bought about 2 years ago but shows and other projects got in the way
I just looked at the instructions for the TK60 and the "Triple differential gearbox simulation mode" doesn't seem to be listed as a mixer option on the TK60. I think that is the mode for the DKLM RC gearbox?
