IBU2U FO Lights mulfuctions
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Re: IBU2U FO Lights mulfuctions
Jhamm yes my friend .Also i don't want to cause any other mulfuction. Maybe i can do it if u explain with simple words how to do it
????? ?? SM-N950F ???????????? Tapatalk
????? ?? SM-N950F ???????????? Tapatalk
Re: IBU2U FO Lights mulfuctions
1. take your Transmitter an turn it on.
2. take the receiver and turn it on
3. take a servo and plug it into channel 1
4. look which stick or switch let move the servo
5. do this in sequence with all channels
then you know which stick and switch
which channel is assigned
does this agree with the instructions?
does it not fit, then plug the channels in the appropriate order to the IBU.
which channel / function belongs to which input
is described in the instructions for IBU
2. take the receiver and turn it on
3. take a servo and plug it into channel 1
4. look which stick or switch let move the servo
5. do this in sequence with all channels
then you know which stick and switch
which channel is assigned
does this agree with the instructions?
does it not fit, then plug the channels in the appropriate order to the IBU.
which channel / function belongs to which input
is described in the instructions for IBU
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Re: IBU2U FO Lights mulfuctions
And why plug the servo at channel 1 ? The switch that causes the problem is SWA : channel 5
????? ?? SM-N950F ???????????? Tapatalk
????? ?? SM-N950F ???????????? Tapatalk
Re: IBU2U FO Lights mulfuctions
jhamm wrote: 4. look which stick or switch let move the servo
5. do this in sequence with all channels
then you know which stick and switch
which channel is assigned
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Re: IBU2U FO Lights mulfuctions
My board is with one something like that. Only one wire to the receiver/ board. It's like the receiver at the photo
????? ?? SM-N950F ???????????? Tapatalk
????? ?? SM-N950F ???????????? Tapatalk
Re: IBU2U FO Lights mulfuctions
This is a i-bus connection.
it would have been good to have had this information beforehand.
Because this, i think there will be an error in the IBU configuration.
Did you know the IBU Manual?
http://www.ibu-electronics.com/doc/IBU2 ... h_V2-3.pdf
Look at "Getting Started" and do all steps again..
it would have been good to have had this information beforehand.
Because this, i think there will be an error in the IBU configuration.
Did you know the IBU Manual?
http://www.ibu-electronics.com/doc/IBU2 ... h_V2-3.pdf
Look at "Getting Started" and do all steps again..
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Re: IBU2U FO Lights mulfuctions
? Know the IBU manual but i got them already set and programmed by my supplier. But i can fix if i know what some things
????? ?? SM-N950F ???????????? Tapatalk
????? ?? SM-N950F ???????????? Tapatalk
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Re: IBU2U FO Lights mulfuctions
My first language is not English so maybe it is a little difficult than u. But I want to try carefully not cause any other problems
????? ?? SM-N950F ???????????? Tapatalk
????? ?? SM-N950F ???????????? Tapatalk
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Re: IBU2U FO Lights mulfuctions
Also i did radio Calibration once yesterday
????? ?? SM-N950F ???????????? Tapatalk
????? ?? SM-N950F ???????????? Tapatalk
- leopardgreece
- Corporal
- Posts: 491
- Joined: Tue Oct 27, 2015 1:48 pm
Re: IBU2U FO Lights mulfuctions
These are ok i think so
????? ?? SM-P605 ???????????? Tapatalk
????? ?? SM-P605 ???????????? Tapatalk