Help connecting elmod pro on torro tank...

[Jofaur86]

Hello
Personally,you lust already identify each if thevRX relation to the Joysticks,of the transmitter???
Know who does wath,the ideal is to conbect a servo to each channel and mark it on a piece of paper,then it is also pissible that necessary to reverse the durection of certain servos ?
Then,determine the driving pr?f?rence ,gas on the right ir left,etc.
Thenalso depend on the radio mode ?mod 1or 2 seems to me that Rad explained this very well in post " Rad "

[Jofaur86]

Example
http://customrcmodels.com/Tanks/id92.htm

[Jofaur86]

Help
Colors Elmod Fusion Pro:
Brown = gas ( moteurs rotation speed )
Orange=Steering
Green.= rotation Turret
Yellow = Elevation canon
Blue. = impératif Ch,5
Gray /purple =other fonctions,switchs pot.
Withe = sound volume ( rotary pot )
Afterwards you gave to adapt the radio stick function
Hoping to have gelped,with midest knowledge

[Jimster]

Watch YouTube videos to learn how to assign switches on Open TX radios. Once you learn how to do that you simply assign the sticks to do what you want.
I’ll post pics of my radio settings later today for an example.

[Andreabert]

Thanks Jofaur

Jimster,.. im trying to see every video i find... but i know nothing about radio... wires... cables....
And when u have a wife that get mad cause you say every 5 minute, for 3 hours.. that u have finish to work “eith that stupid toy”.., its not easy to do things lol

[Jofaur86]

Flysky 6-channel lanual,for info but the same fir all radios,see page 16 post
5-4 Display
5-5 Aux.channels
Should be able to help
https://static1.squarespace.com/static/ ... 160817.pdf

[Andreabert]

im getting crazy. the tank go forward and back with the right stick up and down on channel 2
but the channel 1 doent work...
left right on right stick doent work

[Andreabert]

if i swap the cable red with the brown on the receiver, on my Chanel 2 of the radio, i can go forw/back or left/right ( depending wich color of the cable is atache to channel 2)

but on channel one, if i put the orange or the brown cable, the tank doent move. i see on the radio that the switch work... but nothing happen to the tank

[Andreabert]

no ways guys. im not good to let the tank drive.

now.. dont know why..im not able to start engine. the only thing i can do with sticks are move the turret left right and shoot mg.
im so sad...

i tryed a lot of time to create a new model on the radio.....
the first questions are.
create a glider or plane
the he ask does your model have a motor? if yes , on wich Chanel?
then ask number of aileron on your model... are 1? 2? 3?? and in wich chanels ?
then ask for flaps....
then pick the tail config on your model and i can choose: one channel for elevator and one for rudder and he ask me channels, or i can choose 1 channel for elevator, no rudder, or 2 channels for elevator and one for rudder, or v tail

i tryed lot of times to change this config.. but in fact... i did it without knowing what im doing.........

so.. i think the mistake is here..i hope......

[Jofaur86]

I attached all... thanks.
Im reading Manual Rad... trying to ignition the tank... but nothing happen.
The radio is paired, the red led on the receiver is not blinking. The blue led on the board is binding.
I do the procedure as shoed on manual but nothing happen.
Ps is normal that channel 1 and 2 are on the right stick?

Channel 1and 2 is normal si radio en mode 2,
As already specified,check the POSITION of the CHANNELS in relation to stiks and radio mode??
Personaly on my RX Mode ( AVION ) I have,
Ch.1 ...( aileron ) ....green
Ch.2....(depth)........Brown
Ch.3....(Throttle).....Yellow
Ch.4....(drift ).........orange
Ch.5......................Blue
Ch.6......................White
Radio Flysky FST 6 ..