RC Tank Warfare community hobby forum

Thats cool - Cheers

Update on progress
I connected the turret motor as per the diagram and that works
I connected the barrel elevation (bloc lever baisser canon) and it moved briefly, then stopped.
I connected the gun unit (without a barrel) direct to a battery to see if that worked, and yep it fired a pellet, but when I connected the barrel, if failed to shoot out of it just didn't go down

I may have a look at the transmitter and see if any of the contacts are dirty or broken

Thanks again Jofaur86 for your help

Possible to have photos,transmitter / receiver set,new transmitter batteries and well charged tank batteries Transmitter fr?quency is 27 Mhz or 2.4 Ghz ?

Hi,

Not at home so from memory, its the older 2.4 crystal transmitter / receiver. I've tested the battery with a cable tester to make sure that I'm getting the full charge, otherwise I do make sure that it goes on charge for a while.

Hello

My transmitter

OK,radio 27 Mhz old génération,then wiring diagram attached.For the battery be sure that the even if voltage OK it has the capacity (Ah) at the end if charge for a 7.2 volts must be at least 8.6/9 volts
https://www.rc-panzershop.fr/ekmps/shop ... tkrx18.pdf

Perfect - thanks.
Have had company today so only just catching up.
I've taken apart the transmitter and cleaned the contacts, so just putting it all back together to test.
Thanks again for all the info.