RC Tank Warfare community hobby forum

Is the engine running?

Yes. It makes the sounds for the movement but nothing moves

Have you bound your Transmitter to the Tank ? The details are in the IBU2 instructions, If you don't have them you can download them off the web site----
www.rctankelectronic.com
Shaun.

jarndice wrote:Have you bound your Transmitter to the Tank ? The details are in the IBU2 instructions, If you don't have them you can download them off the web site----
http://www.rctankelectronic.com
Shaun.

Tried it 4 times. First 2 times the turret motor would just constantly spin. 3rd time the smoke unit constantly ran. Now after 4th time nothing moves.

Jimigood wrote:

jarndice wrote:Have you bound your Transmitter to the Tank ? The details are in the IBU2 instructions, If you don't have them you can download them off the web site----
http://www.rctankelectronic.com
Shaun.

Tried it 4 times. First 2 times the turret motor would just constantly spin. 3rd time the smoke unit constantly ran. Now after 4th time nothing moves.

Maybe the fuse has blown can you check?

Fuse is good. I'm doing something wrong somewhere I know I am

Ok now I'm fairly certain this ibu2pro is broken.

Now have power to tracks, turret rotation, and lost what was working. So now on tracks and turret rotation works.

What's working and what's not working?

If things that where not working before are working and things that were working now aren't chances are its not the board. Hopefully we can help diagnose the issue.

Got everything working minus user sounds. Before they would just randomly play. Now they don't play at all.
I removed and replaced the jumpers from receiver to board and replaced them until everything worked. Also had to do the transmitter setup several times.