Heng Long Tiger - Wire not soldered :(

[MichaelC]

Okay here you go. The pics from mine. When I try to take the glue off the yellow one came off too so I have to remember this is a non-working one now !

[odd]

Thank you very much for the pictures!

It's really hard to see where it is supposed to be attached though.

[MichaelC]

odd, your loose black wire should be connected to the same spot as the blue wire. I just opened mine up again and took out the stick to confirm.

[odd]

I tried attaching it where you suggested without much luck. I'm breaking down and buying a new controller so I don't have to deal with it anymore.

[odd]

New controller arrives and it won't turn on

Horrible luck I have.

[lister fiend]

haha
this is a classic heng long problem.
put the batteries in 2 at a time & spin them when there in.
if it still wont switch on, take the battery cover off & give the batteries a push inwards.
this should do the trick or at the very least you should see the red light flicker.
a bit of patience is all you should need, although to be honest
there a bit micky mouse
lister

[odd]

haha
this is a classic heng long problem.
put the batteries in 2 at a time & spin them when there in.
if it still wont switch on, take the battery cover off & give the batteries a push inwards.
this should do the trick or at the very least you should see the red light flicker.
a bit of patience is all you should need, although to be honest
there a bit micky mouse
lister

Haha micky mouse indeed, did what you said and presto! Everything works!