EddyK's HL KV-1

EddyK · Post by **EddyK** » Sat Mar 30, 2013 11:25 pm

Our third tank was Heng Long KV-1.

Only modification that was made, was coloring.

This tank is waiting for Taigen 2,4 GHz kit, too.

Red Devils · Post by **Red Devils** » Sun Mar 31, 2013 12:55 am

Great looking weathering effects, well done...

Derek

EddyK · Post by **EddyK** » Fri May 24, 2013 11:34 pm

Today I rebuilt exaust system of my KV-1.
Usually Heng Long produces KV-1 tanks with one smoke outlet in the rear of the hull, although in reality these tanks had two exhaust outlets located at the top of the hull, behind the turret. So I decided to restore the truth. First I demounted the plastic exhaust simulations and expanded holes a little bit for installation of metal exhaust outlets.

Then I added a smoke unit.

And there is the result!

Post by **maxmekker** » Sat May 25, 2013 9:33 am

I don't see the pic's in the first post , but it looks good in the other pic's

Nice detail on the smoker, doing a kv2 my self now, going to copy that.

where did you pick up that chain and fuel drum ?

EddyK · Post by **EddyK** » Sat May 25, 2013 10:22 am

Thanks! There were changed addreses of the photos in the first post, but I couldn't fix that, because "edit" button is missing almost in all my posts...

The fuel drum comes from rctank.de, but the chain I bought in imitation jewelry shop. There could be found different size necklaces, that fit tanks very well!

))

Scooby · Post by **Scooby** » Sat May 25, 2013 10:48 am

EddyK wrote:Thanks! There were changed addreses of the photos in the first post, but I couldn't fix that, because "edit" button is missing almost in all my posts...

This should be fixed now

EddyK · Post by **EddyK** » Sat May 25, 2013 11:48 am

Scooby wrote:
EddyK wrote:Thanks! There were changed addreses of the photos in the first post, but I couldn't fix that, because "edit" button is missing almost in all my posts...
This should be fixed now

Thanks! I'll fix my posts today later!

Post by **maxmekker** » Sat May 25, 2013 11:25 pm

thanks for the info. Looks good

EddyK · Post by **EddyK** » Fri Aug 09, 2013 9:48 pm

Yesterday I got my russian tanker:

PainlessWolf · Post by **PainlessWolf** » Fri Aug 09, 2013 10:26 pm

Good Afternoon,
This is a great looking tank all around. Sometimes a huge amount of work and detailing is called for, other times just the little things add up to excellence and most importantly, fun. I also sorely want one of those Torro metal KV-2s since I've seen how cool the tank looks in any scale.
Regards,
Painless Wolf

RC Tank Warfare community hobby forum

EddyK's HL KV-1

EddyK's HL KV-1

Re: EddyK's HL KV-1

Re: EddyK's HL KV-1

Re: EddyK's HL KV-1

Re: EddyK's HL KV-1

Re: EddyK's HL KV-1

Re: EddyK's HL KV-1

Re: EddyK's HL KV-1

Re: EddyK's HL KV-1

Re: EddyK's HL KV-1