A new brushless power and a new suspension in a KV

This section contains tips and tricks on building and running model vehicles. If you know any then post them here and if you need to find any, try your first search here.
Forum rules
This section is for posting helpful Tips and Tricks only. Questions need to be posted within general questions section viewforum.php?f=14
Post Reply
User avatar
Edwin
Corporal
Posts: 394
Joined: Tue Jun 11, 2013 8:34 pm
Location: Rheinland Pfalz Germany
Contact:
Contact Edwin

A new brushless power and a new suspension in a KV

Post by Edwin »

Hi,

Today I have a final test drive a KV-pan made ??in I also rebuilt the suspension on my system and installed new gear with brushless motors.

The owner came to me with the request to a suspension that comes with the weight of more than 6kg deal and also wanted to drive a powerful ones. So I have two Asiatam flat gear slightly modified and each with a brushless motor with a max. Provided power of 180W

http://up.picr.de/14968698zg.jpg

http://up.picr.de/14968697po.jpg

http://up.picr.de/14968699vs.jpg

In the test drive, everything is still a bit jerky, because I have made ??only an approximate programming of the transmitter. By the way I drive all my tanks without the usual control boards that I do not need, and so I also avoid many problems ....

http://www.youtube.com/watch?v=9NpWF9fD ... e=youtu.be

regards Edwin
APAMOTEC Model technology in detail
Top
Post Reply

Return to “Tips and Tricks”