Hi Guy's.....
I have finally managed to get hold of a correct green rear column light for my Tiger 131 build .
It is a Tank modelbau item supplied by steve at WDM , can this be connected directly to the
same curcuit board on the STD HL electrics as the front headlight ?
Thanks in advance
.
Correct connection rear column light ?.
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
-
Wildboar44
- Corporal
- Posts: 392
- Joined: Sun Jan 13, 2013 10:28 pm
- Location: Kent England UK.
Correct connection rear column light ?.
Yesterday is our history, Tomorrow is an eternal mistery, Today is a gift, its why its called "The Present".
-
Wildboar44
- Corporal
- Posts: 392
- Joined: Sun Jan 13, 2013 10:28 pm
- Location: Kent England UK.
Re: Correct connection rear column light ?.
With no answer from this forum , i contacted Steve at WDM , his advice was that Tank Modellbau recommend a resistor , but Steve said that many
customers have fitted them direct and have not had any reported problems . I lose connected it to the battery on/off switch and it worked ok .
I may connect the rear column light directly to the on/off switch as a visual reminder that the power is on .
customers have fitted them direct and have not had any reported problems . I lose connected it to the battery on/off switch and it worked ok .
I may connect the rear column light directly to the on/off switch as a visual reminder that the power is on .
Yesterday is our history, Tomorrow is an eternal mistery, Today is a gift, its why its called "The Present".
