Tiger 1, First Tank set up.

[White Tiger]

Well i have been having a hell of a time with this thing so far and have had to take the turret apart to rewire the top (Which even with a guide i am trying to figure out how to do still) I think i might of bitten off more then i can chew with this purchase.....

The control board seems to be acting up as i can't get sound out (or the speaker is faulty not sure)

[MichaelC]

White Tiger, the clark board sound does not come on when you start up the tank. It is not like Taigen or HL. What radio are you using and what firmware (ER9X ?) You need to trigger the sound (and light etc).

[White Tiger]

White Tiger, the clark board sound does not come on when you start up the tank. It is not like Taigen or HL. What radio are you using and what firmware (ER9X ?) You need to trigger the sound (and light etc).

I have a Spektrum Dx6i Radio & spektrum 6115e Receiver i tried everything to put the sound on but i have been told the high pitch whine my board makes is not a good sign.

[MichaelC]

If it makes the sound with or without the speaker plug in then no, its definitely not good, but if only when the speaker is plug in it could just be interference to the speaker from somewhere.

Does everything else work but the sound ? I have been having a problem with the TK-20 where occassionally after I fired the cannon, the board will shutdown the sound. I will then have to turn on the sound again which is very annoying.

If youa re using ER9X I think the sound on is the left stick down and to the left. I believe this is the same set-up for RC2HL. This is assumming that you have the receiver 4 ch plugged in to the right slots.

[White Tiger]

If it makes the sound with or without the speaker plug in then no, its definitely not good, but if only when the speaker is plug in it could just be interference to the speaker from somewhere.

Does everything else work but the sound ? I have been having a problem with the TK-20 where occassionally after I fired the cannon, the board will shutdown the sound. I will then have to turn on the sound again which is very annoying.

If youa re using ER9X I think the sound on is the left stick down and to the left. I believe this is the same set-up for RC2HL. This is assumming that you have the receiver 4 ch plugged in to the right slots.

Well awkwordly the engines both started smoking on me the first time i had it tested off a stand.... so i have returned the tank for a full refund....... (Plus the damage to the Firing Mech & other things didn't help)